configuration pix 506E "pb ping"

[lejef]

Salut!!
je veut configurer un pix 506E, et je galaire.
Kelk1 pourait il m'aider, car là g effectué des tests, des resets, et cela reste toujours pour moi un myster.
En fait, g un modèm adsl(192.168.1.1) connecté sur mon pix,qui lui est connecté sur mon réseaux (140.171.0.0)

Modèm adsl "192.168.1.1" <===> "192.168.1.10" PIX "140.171.65.206" <===> Mon réseaux"140.171.65.0"

et possible de faire un ping sur mon port outside"192.168.1.10".
Pire encore! impossible de faire un ping de inside"140.171.65.206" à outside "192.168.1.10"
J'aimerais comprendre
help ME !!!!!

Voici ma config:

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxxxxx
passwd xxxxxxxxxxxxx
hostname pix506e
domain-name xxxxxxxxxx
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list inside_access_in permit tcp 140.171.0.0 255.255.0.0 192.168.1.0 255.255.255.0
access-list outside_access_in permit tcp 192.168.1.0 255.255.255.0 140.171.0.0 255.255.0.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.1.10 255.255.255.0
ip address inside 140.171.65.206 255.255.0.0
ip audit info action alarm
ip audit attack action alarm
pdm logging informational 100
pdm history enable
arp timeout 14400
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 140.171.65.91 255.255.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 140.171.65.1-140.171.65.200 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
username admin password:xxxxxxxxxx
terminal width 80
Cryptochecksum:xxxxxxxxxxx

[diax]

tu ping d' ou ??