Problème avec SpeedTouch USB pour Free degroupé

[goupil.a]

Bonjour,

Voulant essayer le speedtouch USB, à la place de ma Freebox sur une ligne dégroupé, j'ai un petit problème avec atmarpd.

Voici les log :
Oct 24 23:13:24 ipcop ipcop: Dialing free.
Oct 24 23:13:29 ipcop kernel: usb_control/bulk_msg: timeout
Oct 24 23:13:29 ipcop kernel: usb.c: deregistering driver speedtch
Oct 24 23:13:29 ipcop kernel: usb.c: registered new driver speedtch
Oct 24 23:13:29 ipcop modem_run[633]: modem_run version 1.2 started by root uid 0
Oct 24 23:13:29 ipcop modem_run[633]: Found SpeedTouch USB modem
Oct 24 23:13:29 ipcop modem_run[633]: Modem revision: 0000
Oct 24 23:13:29 ipcop modem_run[633]: Best offset 36 with probability 100%
Oct 24 23:13:29 ipcop modem_run[633]: Best offset 983 with probability 100%
Oct 24 23:13:29 ipcop modem_run[633]: Firmware info (CRC:0xd80bf9f7, Size:991, Checked: Yes, Alcatel/Thomson Boot block (old))
Oct 24 23:13:29 ipcop modem_run[633]: Best offset 1027 with probability 100%
Oct 24 23:13:29 ipcop modem_run[633]: Best offset 762642 with probability 100%
Oct 24 23:13:29 ipcop modem_run[633]: Firmware info (CRC:0x78039fed, Size:762650, Checked: Yes, 3.0.6 - MacOSX - Win32)
Oct 24 23:13:31 ipcop kernel: usb_control/bulk_msg: timeout
Oct 24 23:13:31 ipcop kernel: usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
Oct 24 23:13:31 ipcop modem_run[633]: BLOCK1 : 991 bytes uploaded : OK
Oct 24 23:13:31 ipcop modem_run[633]: BLOCK2 : 511 bytes downloaded : OK
Oct 24 23:13:34 ipcop modem_run[633]: BLOCK3 : 762650 bytes uploaded : OK
Oct 24 23:13:34 ipcop modem_run[633]: BLOCK4 : 511 bytes downloaded : OK
Oct 24 23:13:35 ipcop modem_run[633]: Found kernel mode driver
Oct 24 23:13:35 ipcop modem_run[633]: Modem reference : 3EC18607GAAC01
Oct 24 23:13:49 ipcop modem_run[634]: [monitoring report] ADSL link went up
Oct 24 23:14:05 ipcop modem_run[633]: ADSL synchronization has been obtained
Oct 24 23:14:05 ipcop modem_run[633]: ADSL line is up (7168 kbit/s down | 640 kbit/s up)
Oct 24 23:14:10 ipcop atmarpd: ARPD: Linux ATM ARP, version 2.4.1
Oct 24 23:14:10 ipcop kernel: atmsvc: no signaling demon
Oct 24 23:14:10 ipcop atmarpd: IO: SVCs are not available
Oct 24 23:14:10 ipcop ipcop: atmarpd fail
Oct 24 23:14:10 ipcop ipcop: Dial failed: 256

Une petite idée ?
Merci de votre aide.