OpenBSD 3.4 + Free +Sagem908 non dégroupé en ppoe

[MiniUser]

Bonjour, <BR> <BR>Je n'arrive pas à faire fonctionner mon modem Sagem 908 sous OpenBSD 3.4 en ppoe. <BR> <BR>J'arrive à avoir une connexion sous Windows en USB (bons débits en up/down). <BR> <BR>Voici ma config : <BR> <BR> INTERNET --- xl0=tun0 ---| |--- xl1 --- INTRANET <BR> <BR><!-- BBCode Start --><B>/etc/hostname.xl0</B><!-- BBCode End --> <BR># /etc/hostname.xl0 <BR> <BR>up <BR> <BR><!-- BBCode Start --><B>/etc/hostname.xl1</B><!-- BBCode End --> <BR># /etc/hostname.xl1 <BR> <BR>inet 192.168.1.10 255.255.255.0 NONE <BR> <BR><!-- BBCode Start --><B>/etc/ppp/ppp.conf</B><!-- BBCode End --> <BR># ppp.conf <BR> <BR>default: <BR> set Log Phase Chat LCP IPCP CCP tun command <BR> set redial 15 0 <BR> set reconnect 15 10000 <BR> <BR>pppoe: <BR> set device "!/usr/sbin/pppoe -v -v -v -i xl0" <BR> disable acfcomp protocomp <BR> deny acfcomp <BR> set mtu max 1492 <BR> set speed sync <BR> enable lqr <BR> set lqrperiod 5 <BR> set cd 5 <BR> set dial <BR> set login <BR> set timeout 0 <BR> set authname <!-- BBcode auto-mailto start --><a href="mailto:xxxxxxxxxx@freeadsl">xxxxxxxxxx@freeadsl</a><!-- BBCode auto-mailto end --> <BR> set authkey xxxxxxxx <BR> add! default HISADDR <BR> enable dns <BR> enable mssfixup <BR> <BR>En lançant <!-- BBCode Start --><B>$> ppp -ddial pppoe</B><!-- BBCode End --> j'obtiens dans <!-- BBCode Start --><B>/var/log/daemon</B><!-- BBCode End --> : <BR> <BR>Jan 29 20:13:47 cristal ppp[20119]: Phase: Using interface: tun0 <BR>Jan 29 20:13:47 cristal ppp[20119]: Phase: deflink: Created in closed state <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: default: set redial 15 0 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: default: set reconnect 15 10000 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set device !/usr/sbin/pppoe -v -v -v -i xl0 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: disable acfcomp protocomp <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: deny acfcomp <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set mtu max 1492 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set speed sync <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: enable lqr <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set lqrperiod 5 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set cd 5 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set dial <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set login <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set timeout 0 <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set authname **********@freeadsl <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: set authkey ******** <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: add! default HISADDR <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: enable dns <BR>Jan 29 20:13:47 cristal ppp[20119]: tun0: Command: pppoe: enable mssfixup <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: PPP Started (ddial mode). <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: bundle: Establish <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: deflink: closed -> opening <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Warning: Carrier settings ignored <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: deflink: Connected! <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: deflink: opening -> dial <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: deflink: dial -> carrier <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: deflink: carrier -> login <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: Phase: deflink: login -> lcp <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: LCP: FSM: Using "deflink" as a transport <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: LCP: deflink: State change Initial --> Closed <BR>Jan 29 20:13:47 cristal ppp[15040]: tun0: LCP: deflink: State change Closed --> Stopped <BR>Jan 29 20:13:48 cristal ppp[15040]: tun0: LCP: deflink: LayerStart <BR>Jan 29 20:13:48 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped <BR>Jan 29 20:13:48 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:13:48 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x47e2e182 <BR>Jan 29 20:13:48 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:13:48 cristal ppp[15040]: tun0: LCP: deflink: State change Stopped --> Req-Sent <BR>Jan 29 20:13:51 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent <BR>Jan 29 20:13:51 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:13:51 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x47e2e182 <BR>Jan 29 20:13:51 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:13:54 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent <BR>Jan 29 20:13:54 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:13:54 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x47e2e182 <BR>Jan 29 20:13:54 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x47e2e182 <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: Phase: deflink: read (0): Connection reset by peer <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: deflink: State change Req-Sent --> Starting <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: deflink: LayerFinish <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: LCP: deflink: State change Starting --> Initial <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: Phase: deflink: Disconnected! <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: Phase: deflink: lcp -> logout <BR>Jan 29 20:13:57 cristal ppp[15040]: tun0: Phase: deflink: Disconnected! <BR>Jan 29 20:15:34 cristal ppp[15040]: tun0: Phase: deflink: Enter pause (15) for redialing. <BR>Jan 29 20:15:34 cristal ppp[15040]: tun0: Chat: deflink: Reconnect try 4 of 10000 <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Chat: deflink: Redial timer expired. <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Warning: Carrier settings ignored <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Phase: deflink: Connected! <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Phase: deflink: opening -> dial <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Phase: deflink: dial -> carrier <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Phase: deflink: carrier -> login <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: Phase: deflink: login -> lcp <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: LCP: FSM: Using "deflink" as a transport <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: LCP: deflink: State change Initial --> Closed <BR>Jan 29 20:15:49 cristal ppp[15040]: tun0: LCP: deflink: State change Closed --> Stopped <BR>Jan 29 20:15:50 cristal ppp[15040]: tun0: LCP: deflink: LayerStart <BR>Jan 29 20:15:50 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(4) state = Stopped <BR>Jan 29 20:15:50 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:15:50 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x7f733484 <BR>Jan 29 20:15:50 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:15:50 cristal ppp[15040]: tun0: LCP: deflink: State change Stopped --> Req-Sent <BR>Jan 29 20:15:53 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(4) state = Req-Sent <BR>Jan 29 20:15:53 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:15:53 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x7f733484 <BR>Jan 29 20:15:53 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:15:56 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(4) state = Req-Sent <BR>Jan 29 20:15:56 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:15:56 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x7f733484 <BR>Jan 29 20:15:56 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: deflink: SendConfigReq(4) state = Req-Sent <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: MRU[4] 1500 <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: MAGICNUM[6] 0x7f733484 <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: QUALPROTO[8] proto c025, interval 5000ms <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: read (0): Connection reset by peer <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: deflink: State change Req-Sent --> Starting <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: deflink: LayerFinish <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: LCP: deflink: State change Starting --> Initial <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: Disconnected! <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: lcp -> logout <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: Disconnected! <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: logout -> hangup <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: Connect time: 10 secs: 0 octets in, 104 octets out <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: 17 packets in, 43 packets out <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: total 10 bytes/sec, peak 10 bytes/sec on Wed Jan 29 20:15:53 2003 <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: HUPing 19900 <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: hangup -> opening <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Phase: deflink: Enter pause (15) for redialing. <BR>Jan 29 20:15:59 cristal ppp[15040]: tun0: Chat: deflink: Reconnect try 5 of 10000 <BR> <BR> <BR> <BR>Quelqu'un a-t-il eu ce genre de problèmes ?