<BR>J'ai ca :
<BR>
<BR>4@4@rsion 2.2.19-7.0.8smp (
root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Thu Jun 21 06:16:11 EDT 2001
<BR>BIOS-provided physical RAM map:
<BR> BIOS-e820: 0009f000 @ 00000000 (usable)
<BR> BIOS-e820: 1fef0000 @ 00100000 (usable)
<BR>Intel MultiProcessor Specification v1.4
<BR> Virtual Wire compatibility mode.
<BR>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<BR>Processor #0 Pentium(tm) Pro APIC version 17
<BR>I/O APIC #2 Version 17 at 0xFEC00000.
<BR>Processors: 1
<BR>mapped APIC to ffffe000 (fee00000)
<BR>mapped IOAPIC to ffffd000 (fec00000)
<BR>Detected 899601 kHz processor.
<BR>Console: colour VGA+ 80x25
<BR>Calibrating delay loop... 1795.68 BogoMIPS
<BR>Memory: 516924k/524224k available (1132k kernel code, 424k reserved, 5660k data, 84k init, 0k bigmem)
<BR>Dentry hash table entries: 65536 (order 7, 512k)
<BR>Buffer cache hash table entries: 524288 (order 9, 2048k)
<BR>Page cache hash table entries: 131072 (order 7, 512k)
<BR>VFS: Diskquotas version dquot_6.4.0 initialized
<BR>CPU: L1 I Cache: 64K L1 D Cache: 64K
<BR>CPU: L2 Cache: 64K
<BR>Enabling fast FPU save and restore... done.
<BR>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<BR>Checking 'hlt' instruction... OK.
<BR>POSIX conformance testing by UNIFIX
<BR>mtrr: v1.35a (19990819) Richard Gooch (
rgooch@atnf.csiro.au)
<BR>CPU: L1 I Cache: 64K L1 D Cache: 64K
<BR>CPU: L2 Cache: 64K
<BR>per-CPU timeslice cutoff: 12.50 usecs.
<BR>CPU0: AMD Duron(tm) processor stepping 01
<BR>calibrating APIC timer ...
<BR>..... CPU clock speed is 899.6303 MHz.
<BR>..... system bus clock speed is 199.9177 MHz.
<BR>Error: only one processor found.
<BR>enabling symmetric IO mode... ...done.
<BR>ENABLING IO-APIC IRQs
<BR>init IO_APIC IRQs
<BR> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
<BR>number of MP IRQ sources: 21.
<BR>number of IO-APIC #2 registers: 24.
<BR>testing the IO APIC.......................
<BR>
<BR>IO APIC #2......
<BR>.... register #00: 02000000
<BR>....... : physical APIC id: 02
<BR>.... register #01: 00178011
<BR>....... : max redirection entries: 0017
<BR>....... : IO APIC version: 0011
<BR> WARNING: unexpected IO-APIC, please mail
<BR> to <!-- BBcode auto-mailto start --><a href="mailto:linux-smp@vger.kernel.org">linux-smp@vger.kernel.org</a><!-- BBCode auto-mailto end -->
<BR>.... register #02: 00000000
<BR>....... : arbitration: 00
<BR>.... IRQ redirection table:
<BR> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<BR> 00 000 00 1 0 0 0 0 0 0 00
<BR> 01 000 00 0 0 0 0 0 1 1 59
<BR> 02 0FF 0F 0 0 0 0 0 1 1 51
<BR> 03 000 00 0 0 0 0 0 1 1 61
<BR> 04 000 00 0 0 0 0 0 1 1 69
<BR> 05 0FF 0F 1 1 0 1 0 1 1 71
<BR> 06 000 00 0 0 0 0 0 1 1 79
<BR> 07 000 00 0 0 0 0 0 1 1 81
<BR> 08 000 00 0 0 0 0 0 1 1 89
<BR> 09 000 00 0 0 0 0 0 1 1 91
<BR> 0a 0FF 0F 1 1 0 1 0 1 1 99
<BR> 0b 0FF 0F 1 1 0 1 0 1 1 A1
<BR> 0c 000 00 0 0 0 0 0 1 1 A9
<BR> 0d 000 00 1 0 0 0 0 0 0 00
<BR> 0e 000 00 0 0 0 0 0 1 1 B1
<BR> 0f 000 00 0 0 0 0 0 1 1 B9
<BR> 10 000 00 1 0 0 0 0 0 0 00
<BR> 11 000 00 1 0 0 0 0 0 0 00
<BR> 12 000 00 1 0 0 0 0 0 0 00
<BR> 13 000 00 1 0 0 0 0 0 0 00
<BR> 14 000 00 1 0 0 0 0 0 0 00
<BR> 15 000 00 1 0 0 0 0 0 0 00
<BR> 16 000 00 1 0 0 0 0 0 0 00
<BR> 17 000 00 1 0 0 0 0 0 0 00
<BR>IRQ to pin mappings:
<BR>IRQ0 -> 2
<BR>IRQ1 -> 1
<BR>IRQ3 -> 3
<BR>IRQ4 -> 4
<BR>IRQ5 -> 5
<BR>IRQ6 -> 6
<BR>IRQ7 -> 7
<BR>IRQ8 -> 8
<BR>IRQ9 -> 9
<BR>IRQ10 -> 10
<BR>IRQ11 -> 11
<BR>IRQ12 -> 12
<BR>IRQ13 -> 13
<BR>IRQ14 -> 14
<BR>IRQ15 -> 15
<BR>.................................... done.
<BR>PCI: PCI BIOS revision 2.10 entry at 0xfb180
<BR>PCI: Using configuration type 1
<BR>PCI: Probing PCI hardware
<BR>PCI->APIC IRQ transform: (B0,I7,P3) -> 5
<BR>PCI->APIC IRQ transform: (B0,I7,P3) -> 5
<BR>PCI->APIC IRQ transform: (B0,I7,P2) -> 11
<BR>PCI->APIC IRQ transform: (B0,I8,P0) -> 10
<BR>PCI->APIC IRQ transform: (B0,I12,P0) -> 10
<BR>PCI->APIC IRQ transform: (B1,I0,P0) -> 5
<BR>Linux NET4.0 for Linux 2.2
<BR>Based upon Swansea University Computer Society NET3.039
<BR>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<BR>NET4: Linux TCP/IP 1.0 for NET4.0
<BR>IP Protocols: ICMP, UDP, TCP, IGMP
<BR>TCP: Hash tables configured (ehash 524288 bhash 65536)
<BR>IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
<BR>Linux IP multicast router 0.06 plus PIM-SM
<BR>Initializing RT netlink socket
<BR>Starting kswapd v 1.5
<BR>Detected PS/2 Mouse Port.
<BR>Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
<BR>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<BR>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<BR>pty: 256 Unix98 ptys configured
<BR>Real Time Clock Driver v1.09
<BR>RAM disk driver initialized: 16 RAM disks of 4096K size
<BR>VP_IDE: IDE controller on PCI bus 00 dev 39
<BR>VP_IDE: not 100% native mode: will probe irqs later
<BR> ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
<BR> ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio
<BR>hda: IBM-DPTA-372050, ATA DISK drive
<BR>hdc: Hewlett-Packard CD-Writer Plus 9300, ATAPI CDROM drive
<BR>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<BR>ide1 at 0x170-0x177,0x376 on irq 15
<BR>ide1: probed IRQ 15 failed, using default.
<BR>hda: IBM-DPTA-372050, 19574MB w/1961kB Cache, CHS=2495/255/63
<BR>Floppy drive(s): fd0 is 1.44M
<BR>FDC 0 is a post-1991 82077
<BR>md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
<BR>raid5: measuring checksumming speed
<BR>raid5: MMX detected, trying high-speed MMX checksum routines
<BR> pII_mmx : 2086.737 MB/sec
<BR> p5_mmx : 2401.443 MB/sec
<BR> 8regs : 1365.885 MB/sec
<BR> 32regs : 1012.698 MB/sec
<BR>using fastest function: p5_mmx (2401.443 MB/sec)
<BR>scsi : 0 hosts.
<BR>scsi : detected total.
<BR>md.c: sizeof(mdp_super_t) = 4096
<BR>Partition check:
<BR> hda: hda1 hda2 < hda5 hda6 >
<BR>autodetecting RAID arrays
<BR>autorun ...
<BR>... autorun DONE.
<BR>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
<BR>VFS: Mounted root (ext2 filesystem) readonly.
<BR>Freeing unused kernel memory: 84k freed
<BR>Adding Swap: 265032k swap-space (priority -1)
<BR>usb.c: registered new driver usbdevfs
<BR>usb.c: registered new driver hub
<BR>usb-uhci.c: $Revision: 1.237 $ time 06:20:37 Jun 21 2001
<BR>usb-uhci.c: High bandwidth mode enabled
<BR>usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 5
<BR>usb-uhci.c: Detected 2 ports
<BR>usb.c: new USB bus registered, assigned bus number 1
<BR>usb.c: USB new device connect, assigned device number 1
<BR>hub.c: USB hub found
<BR>hub.c: 2 ports detected
<BR>usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 5
<BR>usb-uhci.c: Detected 2 ports
<BR>usb.c: new USB bus registered, assigned bus number 2
<BR>usb.c: USB new device connect, assigned device number 1
<BR>hub.c: USB hub found
<BR>hub.c: 2 ports detected
<BR>
<BR>
<BR>
<BR>Vous voyez un truc ???
<BR>