Installer Danguardian sous IPCOP V1.03

[Chirrete]

Est-ce que quelqu'un pourrait m'aider à installer Danguardian sous IPCOP v 1.03, car je nage complètement : <BR> <BR>J'essaye avec le méthode add-Onz, mais si quelqu'un à une meilleure méthode... <BR> <BR>Step 1: <BR> <BR>!!!! BACKUP YOUR IPCop CONFIGURATION !!!! <BR> <BR>To do this, make sure there is a Blank 1.44Mb Floppy Disk in the IPCopz FDD Drive, Then using the www Admin GUI make a Backup of you config to the Floppy Disk <BR> <BR>question : est-ce indispensable ? <BR> <BR>Step 2: <BR> <BR>SCP the 13x-Base.tar.gz file across to the /tmp Dir on the IPCop. <BR> <BR>Après deux heures, j'y suis arrivé enfin !!! <BR> <BR>Step 3: <BR> <BR>Now we need use an SSH Session to do the rest of the Setup, So using PuTTY (Download PuTTY) <BR>Login to your IPCop via SSH and type:- <BR> <BR><!-- BBcode auto-mailto start --><a href="mailto:root@firewall:~">root@firewall:~</a><!-- BBCode auto-mailto end --> # cd /tmp <BR><!-- BBcode auto-mailto start --><a href="mailto:root@firewall:/tmp">root@firewall:/tmp</a><!-- BBCode auto-mailto end --> # tar -zxvf 13x-Base.tar.gz -C ./ <BR>./ <BR>./addons.tar.gz <BR>./install.sh <BR><!-- BBcode auto-mailto start --><a href="mailto:root@firewall:/tmp">root@firewall:/tmp</a><!-- BBCode auto-mailto end --> # ./install.sh <BR> <BR> <BR>This should run a Quick Setup Script that will setup the Add-Onz system for you. (If I made it right) <BR> <BR>Once this is Complete the Add-Onz system should be Ready for Use......" <BR> <BR><!-- BBCode Start --><B>Question : je nage complètement, quelqu'un pourrait m'expliquer, mais en détail, ce que je dois faire ?</B><!-- BBCode End --> <BR> <BR> <BR>"Step 4: <BR> <BR>Make sure the Add-Onz List is Updated by going to the NEW Add-Onz page in the www GUI under System on the left hand side, and selecting 'refresh add-on list'. This should then connect to my Add-Onz Server and download the most resent Add-Onz List. <BR> <BR>If no Error messages appear and some Available Add-Onz Appear then the Add-Onz System is working. <BR> <BR>That's It !!!!!!!!!!!!!!!!!!!" <BR> <BR>Là ça devrait aller <BR> <BR>Ensuite pour Danguardian : <BR> <BR>-: Installation Notes :- <BR>1. Make sure you have updated IP-COP with fixes1, fixes2 and fixes3 before installing DansGuardian. <BR>2. Enable the Web Proxy in Transparent mode so that the filtering can occur properly. <BR>3. The installer scripts will block ports 800, 8000, 8001 and 3128 to prevent people from bypassing DansGuardian. <BR> <BR> <BR>-------------------------------------------------------------------------------- <BR> <BR>(download the .tar.gz here) <BR> <BR> <BR>-------------------------------------------------------------------------------- <BR> et après je fais quoi ? <BR> <BR> <IMG SRC="images/smiles/icon_cry.gif"> J'ai vraiment besoin de votre aide car tout cela est pour moi du chinois <IMG SRC="images/smiles/icon_cry.gif"> . <BR> <BR>Merci d'avance