nouvelle conf sur cisco 801 avec configmaker

[poupou54]

Salut <BR>J ai rentré la conf suivante avec le logiciel configmaker qui est super entre parenthese mais cela n abouti pas sur le net .tous les voyants sont ok sur le routeur LINE LAN ET CH1.Ca bagotte et cela plante ??? <BR>version 12.0 <BR>no service pad <BR>service timestamps debug uptime <BR>service timestamps log uptime <BR>no service password-encryption <BR>! <BR>hostname 1234 <BR>! <BR>enable password 1234 <BR>! <BR>ip subnet-zero <BR>! <BR>no ip domain- <BR>isdn switch-type vn3 <BR>! <BR>! <BR>! <BR>interface Ethernet0 <BR> description connected to EthernetLAN <BR> ip address 192.168.1.254 255.255.255.0 <BR> no ip directed-broadcast <BR> ip nat inside <BR> no keepalive <BR>! <BR>interface BRI0 <BR> description connected to Internet <BR> no ip address <BR> no ip directed-broadcast <BR> ip nat outside <BR> encapsulation ppp <BR> dialer rotary-group 1 <BR> isdn switch-type vn3 <BR> no cdp enable <BR>! <BR>interface Dialer1 <BR> description connected to Internet <BR> ip unnumbered Ethernet0 <BR> no ip directed-broadcast <BR> ip nat outside <BR> encapsulation ppp <BR> no ip split-hori <BR> dialer in-band <BR> dialer string 08........ <BR> dialer hold-queue 10 <BR> dialer-group 1 <BR> no cdp enable <BR> ppp authentication chap pap callin <BR> ppp chap hostname fti/1234 <BR> ppp chap password 1234 <BR> ppp pap sent-username fti/1234 password 1234 <BR>! <BR>router rip <BR> version 2 <BR> passive-interface Dialer1 <BR> network 192.168.1.0 <BR> no auto-summary <BR>! <BR>ip nat pool Router-natpool-0 192.168.1.10 192.168.1.11 netmask 255.255.255.0 <BR>ip nat inside source list 1 pool Router-natpool-0 overload <BR>no ip http server <BR>ip classless <BR>ip route 0.0.0.0 0.0.0.0 Dialer1 <BR>! <BR>access-list 1 permit 192.168.1.0 0.0.0.255 <BR>dialer-list 1 protocol ip permit <BR>snmp-server engineID local 00000009020000B0C28BD9C1 <BR>snmp-server community public RO <BR>! <BR>line con 0 <BR> exec-timeout 0 0 <BR> password 1234 <BR> login <BR> transport input none <BR> stopbits 1 <BR>line vty 0 4 <BR> password login 1234 <BR>! <BR>end <BR> <BR>merci

[Ghaliano]

Salut à tous
Si vous pouver siter la configuration plus clairement les réseaux configuré avec leurs interface(@)eérie et fastethernet.Moi aussi je travaille avec un simulateur