RAID / synchronisation MD1 impossible

par **julienb** » 23 Mai 2011 12:06

Bonjour,

J'ai une requête suite à un crash RAID 1 sur ma SME. Suite à panne RAID j'ai procéder au retrait de mon disque /dev/sdb de MD1 pour essayer de le remettre ensuite. Impossible.
Suite à cela j'ai décider d'upgrader les DD de ma SME pour passer de 2X 80Go à 2X 500Go. Passage des disques samsung de SATA2 en SATA 1 car non compatible avec chipset VIA VT8237. Ceci se fait avec Samsung ESTOOLS. Je le met ça pourra toujours servir à quelqu'un car sur le DD il n'y avait que deux jumpers derrière et aucune configuration ne semblait faire passer le DD en sata1.
Donc je laisse mon disque /dev/sda qui est le seul à booter correctement. j'installe le samsung qui est maintenant detecté, je vérifie qu'il est bien en dev/sdb et je passe par la gestion du RAID pour ajouter ce dernier. effacement des données ok et ensuite synchronisation et problème.
Autant /dev/md2 synchronise bien, autant /dev/md1 s'arrête systématiquement à 68.6%, impossible de resynchroniser. Si quelqu'un à une idée de ce qu'il se passe je suis preneur.

J'étais en 7.4 au moment du crash et je suis maintenant en 7.5.1 suite à mise à jour.

Code: Tout sélectionner: [root@base ~]# mdadm -D /dev/md1 /dev/md1: Version : 00.90.01 Creation Time : Mon Mar 26 16:26:24 2007 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Device Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Mon May 23 11:50:08 2011 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 92717e97:80b27659:33eede61:3e3511ea Events : 0.9370 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 - removed 2 8 17 1 spare rebuilding /dev/sdb1

Code: Tout sélectionner: [root@base ~]# mdadm -D /dev/md2 /dev/md2: Version : 00.90.01 Creation Time : Mon Mar 26 16:26:24 2007 Raid Level : raid1 Array Size : 79931328 (76.23 GiB 81.85 GB) Device Size : 79931328 (76.23 GiB 81.85 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Mon May 23 12:04:37 2011 State : clean, degraded, recovering Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Rebuild Status : 29% complete UUID : b5787ff3:c16d46de:4df5d939:ee792372 Events : 0.47828790 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 0 0 - removed 2 8 18 1 spare rebuilding /dev/sdb2

voici /var/log/message quand je redémarre avec seulement mon /dev/sda

Code: Tout sélectionner: May 23 11:43:14 base syslogd 1.4.1: restart. May 23 11:43:14 base syslog: Démarrage de syslogd succeeded May 23 11:43:14 base kernel: klogd 1.4.1, log source = /proc/kmsg started. May 23 11:43:14 base syslog: Démarrage de klogd succeeded May 23 11:43:14 base kernel: Inspecting /boot/System.map-2.6.9-89.31.1.ELsmp May 23 11:43:15 base kernel: Loaded 25045 symbols from /boot/System.map-2.6.9-89.31.1.ELsmp. May 23 11:43:15 base kernel: Symbols match kernel version 2.6.9. May 23 11:43:15 base kernel: No module symbols loaded - kernel modules not enabled. May 23 11:43:15 base kernel: Linux version 2.6.9-89.31.1.ELsmp (mockbuild@builder10.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-11)) #1 SMP Tue Oct 19 17:42:26 EDT 2010 May 23 11:43:15 base kernel: BIOS-provided physical RAM map: May 23 11:43:15 base kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) May 23 11:43:15 base kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) May 23 11:43:15 base kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) May 23 11:43:15 base kernel: BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) May 23 11:43:15 base kernel: BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) May 23 11:43:15 base kernel: BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) May 23 11:43:15 base kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) May 23 11:43:15 base kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) May 23 11:43:15 base kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) May 23 11:43:15 base kernel: 0MB HIGHMEM available. May 23 11:43:15 base kernel: 511MB LOWMEM available. May 23 11:43:15 base kernel: Using x86 segment limits to approximate NX protection May 23 11:43:15 base kernel: On node 0 totalpages: 131056 May 23 11:43:15 base kernel: DMA zone: 4096 pages, LIFO batch:1 May 23 11:43:15 base kernel: Normal zone: 126960 pages, LIFO batch:16 May 23 11:43:15 base kernel: HighMem zone: 0 pages, LIFO batch:1 May 23 11:43:15 base kernel: DMI 2.3 present. May 23 11:43:15 base kernel: Using APIC driver default May 23 11:43:15 base kernel: ACPI: RSDP (v000 AMI ) @ 0x000fa8c0 May 23 11:43:15 base kernel: ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000 May 23 11:43:15 base kernel: ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030 May 23 11:43:15 base kernel: ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0 May 23 11:43:15 base kernel: ACPI: DSDT (v001 VIA K7VT4 0x00001000 INTL 0x02002024) @ 0x00000000 May 23 11:43:15 base kernel: ACPI: PM-Timer IO Port: 0x808 May 23 11:43:15 base kernel: ACPI: Local APIC address 0xfee00000 May 23 11:43:15 base kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 23 11:43:15 base kernel: Processor #0 6:8 APIC version 16 May 23 11:43:15 base kernel: Enabling APIC mode: Flat. Using 0 I/O APICs May 23 11:43:15 base kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 23 11:43:15 base kernel: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 May 23 11:43:15 base kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 23 11:43:15 base kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) May 23 11:43:15 base kernel: ACPI: IRQ0 used by override. May 23 11:43:15 base kernel: ACPI: IRQ2 used by override. May 23 11:43:15 base kernel: ACPI: IRQ9 used by override. May 23 11:43:15 base kernel: Using ACPI (MADT) for SMP configuration information May 23 11:43:15 base kernel: Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) May 23 11:43:15 base kernel: Built 1 zonelists May 23 11:43:15 base kernel: Kernel command line: ro root=/dev/main/root May 23 11:43:15 base kernel: mapped APIC to ffffd000 (fee00000) May 23 11:43:15 base kernel: Initializing CPU#0 May 23 11:43:15 base kernel: CPU 0 irqstacks, hard=c03fc000 soft=c03dc000 May 23 11:43:15 base kernel: PID hash table entries: 2048 (order: 11, 32768 bytes) May 23 11:43:15 base kernel: Detected 999.182 MHz processor. May 23 11:43:15 base kernel: Using pmtmr for high-res timesource May 23 11:43:15 base kernel: Console: colour VGA+ 80x25 May 23 11:43:15 base kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) May 23 11:43:15 base kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) May 23 11:43:15 base kernel: Memory: 512656k/524224k available (1915k kernel code, 10952k reserved, 769k data, 192k init, 0k highmem) May 23 11:43:15 base kernel: Calibrating delay using timer specific routine.. 2000.09 BogoMIPS (lpj=1000048) May 23 11:43:15 base kernel: Security Scaffold v1.0.0 initialized May 23 11:43:15 base kernel: SELinux: Initializing. May 23 11:43:15 base kernel: SELinux: Starting in permissive mode May 23 11:43:15 base kernel: selinux_register_security: Registering secondary module capability May 23 11:43:15 base kernel: Capability LSM initialized as secondary May 23 11:43:15 base kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) May 23 11:43:15 base kernel: CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 May 23 11:43:15 base kernel: CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 May 23 11:43:15 base kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) May 23 11:43:15 base kernel: CPU: L2 Cache: 256K (64 bytes/line) May 23 11:43:15 base kernel: CPU: After all inits, caps: 0383f3ff c1cbfbff 00000000 00000420 May 23 11:43:15 base kernel: Intel machine check architecture supported. May 23 11:43:15 base kernel: Intel machine check reporting enabled on CPU#0. May 23 11:43:15 base kernel: Enabling fast FPU save and restore... done. May 23 11:43:15 base kernel: Enabling unmasked SIMD FPU exception support... done. May 23 11:43:15 base kernel: Checking 'hlt' instruction... OK. May 23 11:43:15 base kernel: CPU0: AMD Athlon(tm) XP stepping 01 May 23 11:43:15 base kernel: per-CPU timeslice cutoff: 730.03 usecs. May 23 11:43:15 base kernel: task migration cache decay timeout: 0 msecs. May 23 11:43:15 base kernel: Total of 1 processors activated (2000.09 BogoMIPS). May 23 11:43:15 base kernel: ENABLING IO-APIC IRQs May 23 11:43:15 base kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 May 23 11:43:15 base kernel: Brought up 1 CPUs May 23 11:43:15 base kernel: zapping low mappings. May 23 11:43:15 base kernel: checking if image is initramfs... it is May 23 11:43:15 base raidmonitor: Starting raidmonitor succeeded May 23 11:43:15 base kernel: Freeing initrd memory: 1324k freed May 23 11:43:15 base kernel: NET: Registered protocol family 16 May 23 11:43:15 base kernel: PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1 May 23 11:43:15 base kernel: PCI: Using configuration type 1 May 23 11:43:15 base kernel: mtrr: v2.0 (20020519) May 23 11:43:15 base kernel: ACPI: Subsystem revision 20040816 May 23 11:43:15 base kernel: ACPI: Interpreter enabled May 23 11:43:15 base kernel: ACPI: Using IOAPIC for interrupt routing May 23 11:43:15 base kernel: ACPI: PCI Root Bridge [PCI0] (00:00) May 23 11:43:15 base kernel: PCI: Probing PCI hardware (bus 00) May 23 11:43:15 base kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 23 11:43:15 base kernel: ACPI: Power Resource [URP1] (off) May 23 11:43:15 base kernel: ACPI: Power Resource [URP2] (off) May 23 11:43:15 base kernel: ACPI: Power Resource [FDDP] (off) May 23 11:43:15 base kernel: ACPI: Power Resource [LPTP] (off) May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15) May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15) May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. May 23 11:43:15 base kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. May 23 11:43:15 base kernel: Linux Plug and Play Support v0.97 (c) Adam Belay May 23 11:43:15 base kernel: usbcore: registered new driver usbfs May 23 11:43:15 base kernel: usbcore: registered new driver hub May 23 11:43:15 base kernel: PCI: Using ACPI for IRQ routing May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185 May 23 11:43:15 base kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193 May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201 May 23 11:43:16 base kernel: apm: BIOS not found. May 23 11:43:16 base kernel: audit: initializing netlink socket (disabled) May 23 11:43:16 base kernel: audit(1306143744.464:1): initialized May 23 11:43:16 base kernel: Total HugeTLB memory allocated, 0 May 23 11:43:16 base kernel: VFS: Disk quotas dquot_6.5.1 May 23 11:43:16 base kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) May 23 11:43:16 base kernel: SELinux: Registering netfilter hooks May 23 11:43:16 base kernel: Initializing Cryptographic API May 23 11:43:16 base kernel: ksign: Installing public key data May 23 11:43:16 base kernel: Loading keyring May 23 11:43:16 base kernel: - Added public key 8C157D8476D4E552 May 23 11:43:16 base kernel: - User ID: CentOS (Kernel Module GPG key) May 23 11:43:16 base kernel: PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1 May 23 11:43:16 base kernel: PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 May 23 11:43:16 base kernel: PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1 May 23 11:43:16 base kernel: PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 May 23 11:43:16 base kernel: PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9 May 23 11:43:16 base kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 May 23 11:43:16 base kernel: ACPI: Processor [CPU1] (supports C1) May 23 11:43:16 base kernel: Real Time Clock Driver v1.12 May 23 11:43:16 base kernel: Linux agpgart interface v0.100 (c) Dave Jones May 23 11:43:16 base kernel: agpgart: Detected VIA KT400/KT400A/KT600 chipset May 23 11:43:16 base kernel: agpgart: Maximum main memory to use for agp memory: 439M May 23 11:43:16 base kernel: agpgart: AGP aperture is 64M @ 0xe0000000 May 23 11:43:16 base kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 May 23 11:43:16 base kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 May 23 11:43:16 base kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 68 ports, IRQ sharing enabled May 23 11:43:16 base kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 23 11:43:16 base kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize May 23 11:43:16 base kernel: divert: not allocating divert_blk for non-ethernet device lo May 23 11:43:16 base kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 May 23 11:43:16 base kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx May 23 11:43:16 base kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1 May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169 May 23 11:43:16 base kernel: VP_IDE: chipset revision 6 May 23 11:43:16 base kernel: VP_IDE: not 100% native mode: will probe irqs later May 23 11:43:16 base kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 May 23 11:43:16 base kernel: ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio May 23 11:43:16 base kernel: ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio May 23 11:43:16 base kernel: Probing IDE interface ide0... May 23 11:43:16 base kernel: hda: CREATIVECD3630E, ATAPI CD/DVD-ROM drive May 23 11:43:16 base kernel: Using cfq io scheduler May 23 11:43:16 base kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 May 23 11:43:16 base kernel: Probing IDE interface ide1... May 23 11:43:16 base kernel: Probing IDE interface ide1... May 23 11:43:16 base kernel: Probing IDE interface ide2... May 23 11:43:16 base kernel: Probing IDE interface ide3... May 23 11:43:16 base kernel: Probing IDE interface ide4... May 23 11:43:16 base kernel: Probing IDE interface ide5... May 23 11:43:16 base kernel: hda: ATAPI 32X CD-ROM drive, 512kB Cache, DMA May 23 11:43:16 base kernel: Uniform CD-ROM driver Revision: 3.20 May 23 11:43:16 base kernel: ide-floppy driver 0.99.newide May 23 11:43:16 base kernel: usbcore: registered new driver hiddev May 23 11:43:16 base kernel: usbcore: registered new driver usbhid May 23 11:43:16 base kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver May 23 11:43:16 base kernel: mice: PS/2 mouse device common for all mice May 23 11:43:16 base kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 May 23 11:43:16 base kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 May 23 11:43:16 base kernel: NET: Registered protocol family 2 May 23 11:43:16 base kernel: IP route cache hash table entries: 8192 (order: 3, 32768 bytes) May 23 11:43:16 base kernel: TCP established hash table entries: 32768 (order: 7, 524288 bytes) May 23 11:43:16 base kernel: TCP bind hash table entries: 32768 (order: 6, 393216 bytes) May 23 11:43:16 base kernel: TCP: Hash tables configured (established 32768 bind 32768) May 23 11:43:16 base kernel: Initializing IPsec netlink socket May 23 11:43:16 base kernel: NET: Registered protocol family 1 May 23 11:43:16 base kernel: NET: Registered protocol family 17 May 23 11:43:16 base kernel: ACPI wakeup devices: May 23 11:43:16 base kernel: PCI0 UAR1 USB1 USB2 USB3 USB4 EHCI USBD PS2K AC9 MC9 ILAN SLPB May 23 11:43:16 base kernel: ACPI: (supports S0 S1 S4 S5) May 23 11:43:16 base kernel: Freeing unused kernel memory: 192k freed May 23 11:43:16 base kernel: SCSI subsystem initialized May 23 11:43:16 base kernel: libata version 2.00 loaded. May 23 11:43:16 base kernel: sata_via 0000:00:0f.0: version 2.0 May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169 May 23 11:43:16 base kernel: sata_via 0000:00:0f.0: routed to hard irq line 10 May 23 11:43:16 base kernel: ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169 May 23 11:43:16 base kernel: ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169 May 23 11:43:16 base kernel: scsi0 : sata_via May 23 11:43:16 base kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 23 11:43:16 base kernel: ata1.00: ATA-7, max UDMA/133, 160086528 sectors: LBA May 23 11:43:16 base kernel: ata1.00: ata1: dev 0 multi count 16 May 23 11:43:16 base kernel: ata1.00: configured for UDMA/133 May 23 11:43:16 base kernel: scsi1 : sata_via May 23 11:43:16 base kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 23 11:43:16 base kernel: ata2.00: ATA-7, max UDMA7, 976773168 sectors: LBA48 NCQ (depth 0/32) May 23 11:43:16 base kernel: ata2.00: ata2: dev 0 multi count 16 May 23 11:43:16 base kernel: ata2.00: configured for UDMA/133 May 23 11:43:16 base kernel: Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 May 23 11:43:16 base kernel: Type: Direct-Access ANSI SCSI revision: 05 May 23 11:43:16 base kernel: SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) May 23 11:43:16 base kernel: SCSI device sda: drive cache: write back May 23 11:43:16 base kernel: SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) May 23 11:43:16 base kernel: SCSI device sda: drive cache: write back May 23 11:43:16 base kernel: sda: sda1 sda2 May 23 11:43:16 base kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 May 23 11:43:16 base kernel: Vendor: ATA Model: SAMSUNG HD502IJ Rev: 1AA0 May 23 11:43:16 base kernel: Type: Direct-Access ANSI SCSI revision: 05 May 23 11:43:16 base kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) May 23 11:43:16 base kernel: SCSI device sdb: drive cache: write back May 23 11:43:16 base kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) May 23 11:43:16 base kernel: SCSI device sdb: drive cache: write back May 23 11:43:16 base kernel: sdb: sdb1 sdb2 May 23 11:43:16 base kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 May 23 11:43:16 base kernel: device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@redhat.com May 23 11:43:16 base kernel: md: raid1 personality registered as nr 3 May 23 11:43:16 base kernel: md: md1 stopped. May 23 11:43:16 base kernel: md: bind<sdb1> May 23 11:43:16 base kernel: md: bind<sda1> May 23 11:43:16 base kernel: md: kicking non-fresh sdb1 from array! May 23 11:43:16 base kernel: md: unbind<sdb1> May 23 11:43:16 base kernel: md: export_rdev(sdb1) May 23 11:43:16 base kernel: raid1: raid set md1 active with 1 out of 2 mirrors May 23 11:43:16 base kernel: md: md2 stopped. May 23 11:43:16 base kernel: md: bind<sdb2> May 23 11:43:16 base kernel: md: bind<sda2> May 23 11:43:16 base kernel: md: kicking non-fresh sdb2 from array! May 23 11:43:16 base kernel: md: unbind<sdb2> May 23 11:43:16 base kernel: md: export_rdev(sdb2) May 23 11:43:16 base kernel: raid1: raid set md2 active with 1 out of 2 mirrors May 23 11:43:16 base kernel: kjournald starting. Commit interval 5 seconds May 23 11:43:16 base kernel: EXT3-fs: mounted filesystem with ordered data mode. May 23 11:43:16 base kernel: inserting floppy driver for 2.6.9-89.31.1.ELsmp May 23 11:43:16 base kernel: Floppy drive(s): fd0 is 1.44M May 23 11:43:16 base kernel: FDC 0 is a post-1991 82077 May 23 11:43:16 base kernel: Ethernet Channel Bonding Driver: v2.6.3-rh (June 8, 2005) May 23 11:43:16 base kernel: bonding: MII link monitoring set to 200 ms May 23 11:43:16 base kernel: divert: allocating divert_blk for bond0 May 23 11:43:16 base kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193 May 23 11:43:16 base kernel: divert: allocating divert_blk for eth0 May 23 11:43:16 base kernel: eth0: VIA Rhine II at 0xdfffbd00, 00:0b:6a:b9:a2:74, IRQ 193. May 23 11:43:16 base kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1. May 23 11:43:16 base kernel: via82xx: Assuming DXS channels with 48k fixed sample rate. May 23 11:43:16 base kernel: Please try dxs_support=1 or dxs_support=4 option May 23 11:43:16 base kernel: and report if it works on your machine. May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185 May 23 11:43:16 base kernel: PCI: Setting latency timer of device 0000:00:11.5 to 64 May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:16 base kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller May 23 11:43:16 base kernel: ehci_hcd 0000:00:10.4: irq 177, pci mem e08dee00 May 23 11:43:16 base kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 May 23 11:43:16 base kernel: ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 May 23 11:43:16 base kernel: hub 1-0:1.0: USB hub found May 23 11:43:16 base kernel: hub 1-0:1.0: 8 ports detected May 23 11:43:16 base kernel: USB Universal Host Controller Interface driver v2.2 May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.0: irq 177, io base 0000c800 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 May 23 11:43:16 base kernel: hub 2-0:1.0: USB hub found May 23 11:43:16 base kernel: hub 2-0:1.0: 2 ports detected May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.1: irq 177, io base 0000cc00 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 May 23 11:43:16 base kernel: hub 3-0:1.0: USB hub found May 23 11:43:16 base kernel: hub 3-0:1.0: 2 ports detected May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.2: irq 177, io base 0000d000 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 May 23 11:43:16 base kernel: hub 4-0:1.0: USB hub found May 23 11:43:16 base kernel: hub 4-0:1.0: 2 ports detected May 23 11:43:16 base kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller May 23 11:42:34 base rc.sysinit: -e May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.3: irq 177, io base 0000d400 May 23 11:42:32 base date: lun mai 23 11:42:32 CEST 2011 May 23 11:43:16 base kernel: uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 May 23 11:42:32 base rc.sysinit: Configuraton de l'horloge (utc) : lun mai 23 11:42:32 CEST 2011 succeeded May 23 11:43:16 base kernel: hub 5-0:1.0: USB hub found May 23 11:42:33 base udevsend[1086]: starting udevd daemon May 23 11:43:16 base kernel: hub 5-0:1.0: 2 ports detected May 23 11:42:33 base udevd[1088]: initialize max_childs to 31 May 23 11:43:16 base kernel: md: Autodetecting RAID arrays. May 23 11:42:33 base udevd[1088]: initialize max_childs_running to 16 May 23 11:43:16 base kernel: md: could not bd_claim sda1. May 23 11:42:33 base scsi.agent[1098]: disk at /devices/pci0000:00/0000:00:0f.0/host0/target0:0:0/0:0:0:0 May 23 11:43:16 base kernel: md: could not bd_claim sda2. May 23 11:42:33 base scsi.agent[1126]: disk at /devices/pci0000:00/0000:00:0f.0/host1/target1:0:0/1:0:0:0 May 23 11:43:16 base kernel: md: could not bd_claim sdb1. May 23 11:42:33 base udevsend[1139]: starting udevd daemon May 23 11:43:16 base kernel: md: could not bd_claim sdb2. May 23 11:42:33 base udevd[1141]: initialize max_childs to 31 May 23 11:43:17 base kernel: md: autorun ... May 23 11:42:33 base udevd[1141]: initialize max_childs_running to 16 May 23 11:43:17 base kernel: md: considering sdb2 ... May 23 11:42:34 base start_udev: Démarrage de udev : succeeded May 23 11:43:17 base kernel: md: adding sdb2 ... May 23 11:42:47 base udevd[1141]: udev done! May 23 11:43:17 base kernel: md: sdb1 has different UUID to sdb2 May 23 11:42:57 base rc.sysinit: -e May 23 11:43:17 base kernel: md: md2 already running, cannot run sdb2 May 23 11:42:57 base sysctl: kernel.sysrq = 0 May 23 11:43:17 base kernel: md: export_rdev(sdb2) May 23 11:42:57 base sysctl: net.ipv4.conf.all.rp_filter = 1 May 23 11:43:17 base kernel: md: considering sdb1 ... May 23 11:42:57 base sysctl: net.ipv4.conf.default.rp_filter = 1 May 23 11:43:17 base kernel: md: adding sdb1 ... May 23 11:42:57 base sysctl: net.ipv4.ip_dynaddr = 1 May 23 11:43:17 base kernel: md: md1 already running, cannot run sdb1 May 23 11:42:57 base sysctl: net.ipv4.ip_forward = 1 May 23 11:43:17 base kernel: md: export_rdev(sdb1) May 23 11:42:57 base sysctl: net.ipv4.tcp_keepalive_time = 300 May 23 11:43:17 base kernel: md: ... autorun DONE. May 23 11:42:57 base sysctl: net.ipv4.tcp_syncookies = 1 May 23 11:43:17 base kernel: ACPI: Power Button (FF) [PWRF] May 23 11:42:57 base rc.sysinit: Configuration des paramètres du noyau : succeeded May 23 11:43:17 base kernel: ACPI: Sleep Button (CM) [SLPB] May 23 11:42:57 base rc.sysinit: Chargement de la configuration clavier par défaut succeeded May 23 11:43:17 base kernel: EXT3 FS on dm-0, internal journal May 23 11:42:57 base rc.sysinit: Configuration du nom d'hôte base: succeeded May 23 11:43:17 base kernel: loop: loaded (max 8 devices) May 23 11:42:58 base fsck: /dev/main/root: clean, 507537/9863168 files, 7384951/19709952 blocks May 23 11:43:17 base kernel: kjournald starting. Commit interval 5 seconds May 23 11:42:58 base rc.sysinit: Vérification du système de fichiers racine : succeeded May 23 11:43:17 base kernel: EXT3 FS on md1, internal journal May 23 11:42:58 base rc.sysinit: Remontage du système de fichiers racine en mode lecture-écriture : succeeded May 23 11:43:17 base kernel: EXT3-fs: mounted filesystem with ordered data mode. May 23 11:43:01 base lvm.static: 2 logical volume(s) in volume group main now active May 23 11:43:17 base kernel: Adding 1048568k swap on /dev/main/swap. Priority:-1 extents:1 May 23 11:43:01 base rc.sysinit: Configuration du gestionnaire de volume logique : succeeded May 23 11:43:17 base kernel: divert: freeing divert_blk for eth0 May 23 11:43:17 base kernel: ip_tables: (C) 2000-2002 Netfilter core team May 23 11:43:03 base lvm.static: 2 logical volume(s) in volume group main now active May 23 11:43:17 base kernel: ip_conntrack version 2.1 (4095 buckets, 32760 max) - 348 bytes per conntrack May 23 11:43:03 base rc.sysinit: Configuration du gestionnaire de volume logique : succeeded May 23 11:43:04 base fsck: /dev/md1: clean, 52/26104 files, 24041/104320 blocks May 23 11:43:04 base rc.sysinit: Vérification des systèmes de fichiers succeeded May 23 11:43:04 base rc.sysinit: Montage des systèmes de fichiers locaux : succeeded May 23 11:43:04 base rc.sysinit: Activation des quotas des systèmes de fichiers locaux : succeeded May 23 11:43:05 base rc.sysinit: Activation de l'espace swap : succeeded May 23 11:43:09 base net.agent[2861]: remove event not handled May 23 11:43:02 base udevd[1141]: udev done! May 23 11:43:09 base init: Entering runlevel: 7 May 23 11:43:10 base net.agent[3066]: remove event not handled May 23 11:43:11 base udevd[1141]: udev done! May 23 11:43:20 base sysctl: kernel.sysrq = 0 May 23 11:43:20 base sysctl: net.ipv4.conf.all.rp_filter = 1 May 23 11:43:20 base sysctl: net.ipv4.conf.default.rp_filter = 1 May 23 11:43:20 base sysctl: net.ipv4.ip_dynaddr = 1 May 23 11:43:20 base sysctl: net.ipv4.ip_forward = 1 May 23 11:43:20 base sysctl: net.ipv4.tcp_keepalive_time = 300 May 23 11:43:20 base sysctl: net.ipv4.tcp_syncookies = 1 May 23 11:43:20 base network: Configuration des paramètres réseau : succeeded May 23 11:43:20 base network: Activation de l'interface loopback : succeeded May 23 11:43:20 base kernel: via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker May 23 11:43:20 base kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 193 May 23 11:43:20 base kernel: divert: allocating divert_blk for eth0 May 23 11:43:20 base kernel: eth0: VIA Rhine II at 0xdfffbd00, 00:0b:6a:b9:a2:74, IRQ 193. May 23 11:43:20 base kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1. May 23 11:43:20 base udevd[1141]: udev done! May 23 11:43:20 base kernel: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 May 23 11:43:25 base network: Activation de l'interface eth0 : succeeded May 23 11:43:25 base irqbalance: Can't balance irqs on a uniprocessor system: failed May 23 11:43:26 base crond: Démarrage de crond succeeded May 23 11:43:26 base acpid: Démarrage de acpid succeeded May 23 11:43:26 base mysqld: Starting mysqld succeeded May 23 11:43:26 base dnscache: Starting dnscache succeeded May 23 11:43:27 base imap: Starting imap succeeded May 23 11:43:28 base imaps: Starting imaps succeeded May 23 11:43:28 base pop3: Starting pop3 succeeded May 23 11:43:28 base pop3s: Starting pop3s succeeded May 23 11:43:29 base tinydns: Starting tinydns succeeded May 23 11:43:30 base lpd: Starting lpd succeeded May 23 11:43:30 base clamd: Starting clamd succeeded May 23 11:43:30 base freshclam: Starting freshclam succeeded May 23 11:43:32 base ldap: Starting ldap succeeded May 23 11:43:33 base ntpd: Starting ntpd succeeded May 23 11:43:34 base qmail: Starting qmail succeeded May 23 11:43:34 base ftp: Starting ftp succeeded May 23 11:43:34 base slapd[4286]: @(#) $OpenLDAP: slapd 2.2.13 (Nov 30 2010 03:47:10) $ mockbuild@builder10.centos.org:/builddir/build/BUILD/openldap-2.2.13/openldap-2.2.13/build-servers/servers/slapd May 23 11:43:34 base qpsmtpd: Starting qpsmtpd succeeded May 23 11:43:35 base slapd[4286]: bdb_initialize: Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003) May 23 11:43:35 base sqpsmtpd: Starting sqpsmtpd succeeded May 23 11:43:35 base slapd[4286]: bdb_initialize: Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003) May 23 11:43:35 base slapd[4286]: /etc/openldap/slapd.conf: line 20: schema checking disabled! your mileage may vary! May 23 11:43:36 base slapd[4286]: slapd starting May 23 11:43:36 base sshd: Starting sshd succeeded May 23 11:43:36 base httpd-admin: Starting httpd-admin succeeded May 23 11:43:37 base httpd-e-smith: Starting httpd-e-smith succeeded May 23 11:43:38 base radiusd: Starting radiusd succeeded May 23 11:43:38 base smolt: succeeded May 23 11:43:38 base spamd: Starting spamd succeeded May 23 11:43:38 base ntpd: logging to file /dev/stdout May 23 11:43:39 base squid: Starting squid succeeded May 23 11:43:40 base kernel: NET: Registered protocol family 5 May 23 11:43:20 base udevd[1141]: udev done! May 23 11:43:41 base atalkd[4577]: restart (2.0.3) May 23 11:43:41 base squid[4549]: Starting Squid Cache version 2.5.STABLE14 for i686-redhat-linux-gnu... May 23 11:43:41 base squid[4549]: Process ID 4549 May 23 11:43:41 base squid[4549]: With 1024 file descriptors available May 23 11:43:41 base squid[4549]: DNS Socket created at 0.0.0.0, port 55349, FD 5 May 23 11:43:41 base squid[4549]: Adding nameserver 192.168.1.20 from /etc/resolv.conf May 23 11:43:41 base squid[4549]: User-Agent logging is disabled. May 23 11:43:41 base squid[4549]: Referer logging is disabled. May 23 11:43:41 base nmbd: Starting nmbd succeeded May 23 11:43:42 base atalkd[4577]: zip_getnetinfo for eth0 May 23 11:43:42 base smbd: Starting smbd succeeded May 23 11:43:44 base squid[4549]: Unlinkd pipe opened on FD 10 May 23 11:43:44 base squid[4549]: Swap maxSize 102400 KB, estimated 34133 objects May 23 11:43:44 base squid[4549]: Target number of buckets: 1706 May 23 11:43:44 base squid[4549]: Using 8192 Store buckets May 23 11:43:44 base squid[4549]: Max Mem size: 8192 KB May 23 11:43:44 base squid[4549]: Max Swap size: 102400 KB May 23 11:43:45 base squid[4549]: Rebuilding storage in /var/spool/squid (DIRTY) May 23 11:43:45 base squid[4549]: Using Least Load store dir selection May 23 11:43:45 base squid[4549]: Current Directory is /var/service/squid May 23 11:43:45 base messagebus: Démarrage de messagebus succeeded May 23 11:43:45 base squid[4549]: Loaded Icons. May 23 11:43:45 base squid[4549]: Accepting HTTP connections at 192.168.1.20, port 3128, FD 12. May 23 11:43:45 base squid[4549]: Accepting HTTP connections at 127.0.0.1, port 3128, FD 13. May 23 11:43:45 base squid[4549]: Accepting ICP messages at 192.168.1.20, port 3130, FD 14. May 23 11:43:45 base squid[4549]: Outgoing ICP messages on port 3130, FD 15. May 23 11:43:45 base squid[4549]: WCCP Disabled. May 23 11:43:45 base squid[4549]: Ready to serve requests. May 23 11:43:45 base squid[4549]: Done reading /var/spool/squid swaplog (0 entries) May 23 11:43:45 base squid[4549]: Finished rebuilding storage from disk. May 23 11:43:45 base squid[4549]: 0 Entries scanned May 23 11:43:45 base squid[4549]: 0 Invalid entries. May 23 11:43:45 base squid[4549]: 0 With invalid flags. May 23 11:43:45 base squid[4549]: 0 Objects loaded. May 23 11:43:45 base squid[4549]: 0 Objects expired. May 23 11:43:45 base squid[4549]: 0 Objects cancelled. May 23 11:43:45 base squid[4549]: 0 Duplicate URLs purged. May 23 11:43:45 base squid[4549]: 0 Swapfile clashes avoided. May 23 11:43:45 base squid[4549]: Took 5.5 seconds ( 0.0 objects/sec). May 23 11:43:45 base squid[4549]: Beginning Validation Procedure May 23 11:43:45 base squid[4549]: Completed Validation Procedure May 23 11:43:45 base squid[4549]: Validated 0 Entries May 23 11:43:45 base squid[4549]: store_swap_size = 0k May 23 11:43:45 base smbd[4602]: [2011/05/23 11:43:45, 0] smbd/server.c:main(1000) May 23 11:43:45 base smbd[4602]: standard input is not a socket, assuming -D option May 23 11:43:47 base squid[4549]: storeLateRelease: released 0 objects May 23 11:43:48 base sme7admind: Daemonizing sme7admin... (pid 4654) May 23 11:43:48 base sme7admind: Démarrage de sme7admind succeeded May 23 11:43:49 base haldaemon: Démarrage de haldaemon succeeded May 23 11:43:50 base fstab-sync[4717]: removed all generated mount points May 23 11:43:50 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:43:50 base kernel: Invalid sda: sense key No Sense May 23 11:43:50 base kernel: ASC= 0 ASCQ=ff May 23 11:43:50 base kernel: SCSI error : <1 0 0 0> return code = 0x8000002 May 23 11:43:50 base kernel: Invalid sdb: sense key No Sense May 23 11:43:50 base kernel: ASC= 0 ASCQ=ff May 23 11:43:51 base fstab-sync[4799]: added mount point /media/cdrom for /dev/hda May 23 11:43:52 base atalkd[4577]: zip_getnetinfo for eth0 May 23 11:43:53 base backuppc: Démarrage de BackupPC succeeded May 23 11:43:55 base esmith::event[4861]: Processing event: local May 23 11:43:55 base esmith::event[4861]: Running event handler: /etc/e-smith/events/actions/generic_template_expand May 23 11:43:56 base esmith::event[4861]: expanding /etc/sysconfig/kernel May 23 11:43:57 base esmith::event[4861]: expanding /boot/grub/grub.conf May 23 11:43:57 base esmith::event[4861]: generic_template_expand=action|Event|local|Action|generic_template_expand|Start|1306143835 317093|End|1306143837 753852|Elapsed|2.436759 May 23 11:43:57 base esmith::event[4861]: Running event handler: /etc/e-smith/events/local/S50clear-pptp-interfaces May 23 11:43:57 base esmith::event[4861]: S50clear-pptp-interfaces=action|Event|local|Action|S50clear-pptp-interfaces|Start|1306143837 754527|End|1306143837 934414|Elapsed|0.179887 May 23 11:43:57 base esmith::event[4861]: Running event handler: /etc/e-smith/events/actions/adjust-services May 23 11:43:58 base esmith::event[4861]: adjusting supervised yum (once) May 23 11:43:58 base esmith::event[4861]: adjust-services=action|Event|local|Action|adjust-services|Start|1306143837 935220|End|1306143838 334338|Elapsed|0.399118 May 23 11:44:02 base atalkd[4577]: zip_getnetinfo for eth0 May 23 11:44:12 base atalkd[4577]: config for no router May 23 11:44:13 base atalkd[4577]: ready 0/0/0 May 23 11:44:13 base atalk: Démarrage de atalkd succeeded May 23 11:44:19 base atalk: Registering base:Workstation: succeeded May 23 11:44:25 base atalk: Registering base:netatalk: succeeded May 23 11:44:25 base papd[4945]: restart (2.0.3) May 23 11:44:25 base atalk: Démarrage de papd succeeded May 23 11:44:25 base atalk: Démarrage de cnid_metad succeeded May 23 11:44:26 base afpd[4953]: Registering CNID module [last] May 23 11:44:26 base afpd[4953]: Registering CNID module [cdb] May 23 11:44:26 base afpd[4953]: Registering CNID module [dbd] May 23 11:44:26 base afpd[4953]: Loading ConfigFile May 23 11:44:26 base atalk: Démarrage de afpd succeeded May 23 11:44:32 base afpd[4953]: base:AFPServer@* started on 65280.215:128 (2.0.3) May 23 11:44:32 base afpd[4953]: ASIP started on 192.168.1.20:548(6) (2.0.3) May 23 11:44:32 base afpd[4953]: uam: loading (/usr/lib/uams_dhx.so) May 23 11:44:32 base afpd[4953]: uam: uams_dhx.so loaded May 23 11:44:32 base afpd[4953]: uam: loading (/usr/lib/uams_pgp.so) May 23 11:44:32 base afpd[4953]: uam: uam not found (status=-1) May 23 11:44:32 base afpd[4953]: uam: "DHCAST128" available May 23 11:44:32 base afpd[4953]: Finished parsing Config File

voici /var/log/message quand j'ajoute le nouveau DD au raid

Code: Tout sélectionner: May 23 11:49:33 base add_drive_to_raid: May 23 11:49:33 base add_drive_to_raid: Disque /dev/sdb: 60801 cylindres, 255 têtes, 63 secteurs/piste May 23 11:49:33 base add_drive_to_raid: Vieille situation: May 23 11:49:33 base add_drive_to_raid: Unités= blocs de 1024 octets, décompte à partir de 0 May 23 11:49:33 base add_drive_to_raid: May 23 11:49:33 base add_drive_to_raid: Périph Amorce Début Fin #blocs Id Système May 23 11:49:33 base add_drive_to_raid: /dev/sdb1 * 0+ 104384 104384+ fd Linux raid autodetect May 23 11:49:33 base add_drive_to_raid: /dev/sdb2 104385 488384031 488279647 fd Linux raid autodetect May 23 11:49:33 base add_drive_to_raid: /dev/sdb3 0 - 0 0 Vide May 23 11:49:33 base add_drive_to_raid: /dev/sdb4 0 - 0 0 Vide May 23 11:49:33 base add_drive_to_raid: Nouvelle situation: May 23 11:49:33 base add_drive_to_raid: Unités= blocs de 1024 octets, décompte à partir de 0 May 23 11:49:33 base add_drive_to_raid: May 23 11:49:33 base add_drive_to_raid: Périph Amorce Début Fin #blocs Id Système May 23 11:49:33 base add_drive_to_raid: /dev/sdb1 * 0+ 104384 104384+ fd Linux raid autodetect May 23 11:49:33 base add_drive_to_raid: /dev/sdb2 104385 488384031 488279647 fd Linux raid autodetect May 23 11:49:33 base add_drive_to_raid: /dev/sdb3 0 - 0 0 Vide May 23 11:49:33 base add_drive_to_raid: /dev/sdb4 0 - 0 0 Vide May 23 11:49:33 base add_drive_to_raid: AVERTISSMENT: la partition 1 ne se termine pas sur une frontière de cylindre May 23 11:49:33 base add_drive_to_raid: Succès d'écriture de la nouvelle table de partitions May 23 11:49:33 base add_drive_to_raid: May 23 11:49:33 base add_drive_to_raid: Relecture de la table de partitions ... May 23 11:49:37 base kernel: SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB) May 23 11:49:37 base kernel: SCSI device sdb: drive cache: write back May 23 11:49:37 base kernel: sdb: sdb1 sdb2 May 23 11:49:37 base add_drive_to_raid: Si vous créez ou modifiez une partition DOS, /dev/foo7, par exemple, alors May 23 11:49:37 base add_drive_to_raid: utiliser dd(1) pour mettre à zéro les premiers 512 octets: May 23 11:49:37 base add_drive_to_raid: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 May 23 11:49:37 base add_drive_to_raid: (Consulter fdisk(8).) May 23 11:49:37 base add_drive_to_raid: May 23 11:49:37 base udevd[1141]: udev done! May 23 11:49:47 base kernel: md: bind<sdb1> May 23 11:49:47 base add_drive_to_raid: May 23 11:49:47 base add_drive_to_raid: Checking partitions on /dev/sdb... May 23 11:49:47 base add_drive_to_raid: May 23 11:49:47 base add_drive_to_raid: Going to add /dev/sdb1 to /dev/md1 May 23 11:49:47 base kernel: RAID1 conf printout: May 23 11:49:47 base kernel: --- wd:1 rd:2 May 23 11:49:47 base kernel: disk 0, wo:0, o:1, dev:sda1 May 23 11:49:47 base kernel: disk 1, wo:1, o:1, dev:sdb1 May 23 11:49:47 base kernel: md: syncing RAID array md1 May 23 11:49:47 base kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. May 23 11:49:47 base kernel: md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction. May 23 11:49:47 base kernel: md: using 128k window, over a total of 104320 blocks. May 23 11:49:47 base add_drive_to_raid: mdadm: hot added /dev/sdb1 May 23 11:49:49 base kernel: md: bind<sdb2> May 23 11:49:49 base add_drive_to_raid: Going to add /dev/sdb2 to /dev/md2 May 23 11:49:49 base add_drive_to_raid: mdadm: hot added /dev/sdb2 May 23 11:49:49 base kernel: RAID1 conf printout: May 23 11:49:49 base kernel: --- wd:1 rd:2 May 23 11:49:49 base kernel: disk 0, wo:0, o:1, dev:sda2 May 23 11:49:49 base kernel: disk 1, wo:1, o:1, dev:sdb2 May 23 11:49:49 base kernel: md: delaying resync of md2 until md1 has finished resync (they share one or more physical units) May 23 11:49:51 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:49:51 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:49:51 base kernel: ata1.00: cmd c8/00:00:3f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in May 23 11:49:51 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:49:51 base kernel: ata1.00: configured for UDMA/133 May 23 11:49:51 base kernel: ata1: EH complete May 23 11:49:52 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:49:52 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:49:52 base kernel: ata1.00: cmd c8/00:00:3f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in May 23 11:49:52 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:49:52 base kernel: ata1.00: configured for UDMA/133 May 23 11:49:52 base kernel: ata1: EH complete May 23 11:49:54 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:06 base add_drive_to_raid: May 23 11:50:08 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:08 base add_drive_to_raid: Waiting for boot partition to sync before installing grub... May 23 11:50:08 base kernel: ata1.00: cmd c8/00:00:3f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in May 23 11:50:08 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:08 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:08 base kernel: ata1: EH complete May 23 11:50:09 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:09 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:09 base kernel: ata1.00: cmd c8/00:00:3f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in May 23 11:50:09 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:09 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:09 base kernel: ata1: EH complete May 23 11:50:09 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:09 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:09 base kernel: ata1.00: cmd c8/00:00:3f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 in May 23 11:50:09 base add_drive_to_raid: Probing devices to guess BIOS drives. This may take a long time. May 23 11:50:09 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:09 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:09 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:09 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:09 base kernel: end_request: I/O error, dev sda, sector 142655 May 23 11:50:09 base kernel: ata1: EH complete May 23 11:50:09 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:09 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:f8:47:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142663 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:f0:4f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 122880 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142671 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:e8:57:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 118784 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142679 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:e0:5f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 114688 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142687 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:d8:67:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 110592 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142695 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:d0:6f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 106496 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142703 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:c8:77:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 102400 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142711 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 May 23 11:50:10 base kernel: ata1.00: (BMDMA stat 0x4) May 23 11:50:10 base kernel: ata1.00: cmd c8/00:c0:7f:2d:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 98304 in May 23 11:50:10 base kernel: res 51/40:00:80:2d:02/00:00:00:00:00/e0 Emask 0x9 (media error) May 23 11:50:10 base kernel: ata1.00: configured for UDMA/133 May 23 11:50:10 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:10 base kernel: Info fld=0x4000000 (nonstd), Invalid sda: sense = 72 11 May 23 11:50:10 base kernel: end_request: I/O error, dev sda, sector 142719 May 23 11:50:10 base kernel: ata1: EH complete May 23 11:50:10 base kernel: raid1: sda: unrecoverable I/O read error for block 142592 May 23 11:50:10 base kernel: md: md1: sync done. May 23 11:50:10 base kernel: SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) May 23 11:50:10 base add_drive_to_raid: May 23 11:50:10 base kernel: SCSI device sda: drive cache: write back May 23 11:50:10 base kernel: SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) May 23 11:50:10 base add_drive_to_raid: May 23 11:50:10 base add_drive_to_raid: GNU GRUB version 0.95 (640K lower / 3072K upper memory) May 23 11:50:10 base kernel: SCSI device sda: drive cache: write back May 23 11:50:10 base add_drive_to_raid: May 23 11:50:10 base kernel: md: syncing RAID array md2 May 23 11:50:10 base add_drive_to_raid: [ Minimal BASH-like line editing is supported. For the first word, TAB May 23 11:50:10 base kernel: md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc. May 23 11:50:10 base add_drive_to_raid: lists possible command completions. Anywhere else TAB lists the possible May 23 11:50:10 base kernel: md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction. May 23 11:50:10 base kernel: md: using 128k window, over a total of 79931328 blocks. May 23 11:50:10 base kernel: md: delaying resync of md1 until md2 has finished resync (they share one or more physical units) May 23 11:50:10 base add_drive_to_raid: completions of a device/filename.] May 23 11:50:10 base add_drive_to_raid: grub> device (hd0) /dev/sdb May 23 11:50:10 base add_drive_to_raid: grub> root (hd0,0) May 23 11:50:10 base add_drive_to_raid: Filesystem type is ext2fs, partition type 0xfd May 23 11:50:10 base add_drive_to_raid: grub> setup (hd0) May 23 11:50:10 base add_drive_to_raid: Checking if "/boot/grub/stage1" exists... no May 23 11:50:10 base add_drive_to_raid: Checking if "/grub/stage1" exists... no May 23 11:50:10 base add_drive_to_raid: May 23 11:50:10 base add_drive_to_raid: Error 2: Bad file or directory type May 23 11:50:10 base add_drive_to_raid: grub> quit May 23 11:50:11 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:50:11 base kernel: Invalid sda: sense key No Sense May 23 11:50:11 base kernel: ASC= 0 ASCQ=ff May 23 11:50:11 base kernel: SCSI error : <1 0 0 0> return code = 0x8000002 May 23 11:50:11 base kernel: Invalid sdb: sense key No Sense May 23 11:50:11 base kernel: ASC= 0 ASCQ=ff May 23 11:55:01 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 11:55:01 base kernel: Invalid sda: sense key No Sense May 23 11:55:01 base kernel: ASC= 0 ASCQ=ff May 23 11:55:01 base kernel: SCSI error : <1 0 0 0> return code = 0x8000002 May 23 11:55:01 base kernel: Invalid sdb: sense key No Sense May 23 11:55:01 base kernel: ASC= 0 ASCQ=ff May 23 12:00:06 base kernel: SCSI error : <0 0 0 0> return code = 0x8000002 May 23 12:00:06 base kernel: Invalid sda: sense key No Sense May 23 12:00:06 base kernel: ASC= 0 ASCQ=ff May 23 12:00:06 base kernel: SCSI error : <1 0 0 0> return code = 0x8000002 May 23 12:00:06 base kernel: Invalid sdb: sense key No Sense May 23 12:00:06 base kernel: ASC= 0 ASCQ=ff May 23 12:00:42 base pwauth(pam_unix)[5602]: authentication failure; logname= uid=101 euid=0 tty= ruser= rhost= user=admin

par **Franck78** » 23 Mai 2011 13:29

pour l'avoir véci il y a 5 jours, voila la raison, chez moi, qui faisait arreter la resynchro au même point (deux essais).

Le disque source théoriquement en bon état présentait aussi des secteurs défectueux impossible lire.
=>Echec

Il faut d'un façon ou d'un autre faire remapper ces secteurs illisible par le controleur du HD. Cela se fait en écrivant dessus.
(c'est ce que j'ai lu du moins).

Je n'ai pas essayé de résoudre ce problème car justement c'était un essai avec le disque défecteux d'un RAID1. Je voulais vérifier quelques petits détails avant le resynchro avec l'autre disque en bon état !

par **julienb** » 24 Mai 2011 10:06

Personne à une idée de la marche à suivre? J'ai beau chercher, à part un réinstallation complète je ne vois pas.

J'ai installé Affa afin de sauvegarder sur notre NAS les données du poste et pouvoir réinstaller le serveur sur une installation clean.

par **Franck78** » 24 Mai 2011 12:37

julienb a écrit:Personne à une idée de la marche à suivre? J'ai beau chercher, à part un réinstallation complète je ne vois pas.

Pour faire quoi ? T'as même pas confirmer ou infirmer la cause que je te donne :evil:

par **julienb** » 25 Mai 2011 15:40

Autant pour moi,

Pour savoir si mon DD à des secteurs deffectueux, je ne suis pas sûr de la démarche à suivre. Voici ce que donne un smartctl -a /dev/sda

Code: Tout sélectionner: [root@base ~]# smartctl -a /dev/sda smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Maxtor 6Y080M0 Serial Number: Y2DD1VZE Firmware Version: YAR51EW0 User Capacity: 81,964,302,336 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Wed May 25 15:39:16 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 118) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 225 224 063 Pre-fail Always - 6141 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 853 5 Reallocated_Sector_Ct 0x0033 233 191 063 Pre-fail Always - 203 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 246 243 187 Pre-fail Always - 60806 9 Power_On_Minutes 0x0032 231 231 000 Old_age Always - 196h+39m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 251 251 000 Old_age Always - 921 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 53 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 30405 196 Reallocated_Event_Count 0x0008 001 001 000 Old_age Offline - 1110 197 Current_Pending_Sector 0x0008 253 195 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0008 252 001 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 252 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 28 202 TA_Increase_Count 0x000a 253 001 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 213 180 Pre-fail Always - 108 204 Shock_Count_Write_Opern 0x000a 253 001 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 193 188 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 57343 inconsistent with error log pointer 5 ATA Error Count: 57343 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 57343 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 7f 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d7f = 142719 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 c0 7f 2d 02 e0 00 06:00:34.160 READ DMA ec 03 46 00 00 00 a0 00 06:00:34.144 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:34.144 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:34.144 IDENTIFY DEVICE c8 00 c8 77 2d 02 e0 00 06:00:33.120 READ DMA Error 57342 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 77 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d77 = 142711 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 c8 77 2d 02 e0 00 06:00:33.120 READ DMA ec 03 46 00 00 00 a0 00 06:00:33.104 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:33.104 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:33.104 IDENTIFY DEVICE c8 00 d0 6f 2d 02 e0 00 06:00:32.096 READ DMA Error 57341 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 6f 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d6f = 142703 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d0 6f 2d 02 e0 00 06:00:32.096 READ DMA ec 03 46 00 00 00 a0 00 06:00:32.080 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:32.080 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:32.080 IDENTIFY DEVICE c8 00 d8 67 2d 02 e0 00 06:00:31.072 READ DMA Error 57340 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 67 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d67 = 142695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d8 67 2d 02 e0 00 06:00:31.072 READ DMA ec 03 46 00 00 00 a0 00 06:00:31.056 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:31.056 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:31.056 IDENTIFY DEVICE c8 00 e0 5f 2d 02 e0 00 06:00:30.032 READ DMA Error 57339 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 5f 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d5f = 142687 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 e0 5f 2d 02 e0 00 06:00:30.032 READ DMA ec 03 46 00 00 00 a0 00 06:00:30.016 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:30.016 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:30.016 IDENTIFY DEVICE c8 00 e8 57 2d 02 e0 00 06:00:29.008 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed: read failure 60% 7321 142720 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Je viens de lancer un test long histoire de savoir ce qu'il y a vraiment, vu qu’apparemment y'a plein de choses qui ne me plaisent pas. Désolé pour l'autre jour, mais bon comme je suis pas super à l'aise avec linux en mode shell, j'essaye de me concentrer sur ce qui est le plus simple ou abordable. En plus même si les données du serveur sont sauvegarder, je suis beaucoup moins sûr en ce qui concerne la config. J'essaye de mener des test avec Affa en ce moment.

par **julienb** » 25 Mai 2011 16:30

1

Download and burn Ubuntu to a DVD. If you have another Linux system or Live CD that can access the hard drive, you may skip this step.
2

Restart the computer and boot from the DVD or alternate system.
3

Open a terminal window.
4

Type "fdisk -l" (without the quotation marks) to see the hard drive and partition device names. This displays the hard drives and partitions on your system. Make a note of the hard drive or partition you want to scan for the "e2fsck" command. Please note the parameter after the command is a lower-case "L."
5

Type the following command: sudo e2fsck -cfpv /dev/sdb2. Replace "sdb2" with your actual device name, this can be an entire drive, such as "sda" or a partition, such as "sda1."

The parameters have the following meanings: "c" searches for bad blocks and adds them to the list, "f" forces a check on the file system, "p" repairs anything that can be safely repaired and "v" is verbose mode so you can see the command progress.

The "e2fsck" command can take a long time to run, even several hours on a particularly large drive.
6

Exit the terminal after the "e2fsck" command is finished.
7

Remove the DVD/CD if any and reboot the system. Your file system is up to date with any bad sectors and will avoid them; any repairable issues have been fixed.

Read more: How to Fix Bad Sectors in Linux | eHow.com http://www.ehow.com/how_7226154_fix-bad ... z1NNHeB423

par **julienb** » 25 Mai 2011 18:18

résultat test long

Code: Tout sélectionner: [root@base ~]# smartctl -a /dev/sda smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: Maxtor 6Y080M0 Serial Number: Y2DD1VZE Firmware Version: YAR51EW0 User Capacity: 81,964,302,336 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0 Local Time is: Wed May 25 18:16:58 2011 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 116) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 241) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 37) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0027 225 224 063 Pre-fail Always - 6141 4 Start_Stop_Count 0x0032 253 253 000 Old_age Always - 853 5 Reallocated_Sector_Ct 0x0033 233 191 063 Pre-fail Always - 203 6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline - 0 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always - 0 8 Seek_Time_Performance 0x0027 247 243 187 Pre-fail Always - 49928 9 Power_On_Minutes 0x0032 231 231 000 Old_age Always - 199h+16m 10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always - 0 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 251 251 000 Old_age Always - 921 192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always - 0 194 Temperature_Celsius 0x0032 253 253 000 Old_age Always - 56 195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always - 21558 196 Reallocated_Event_Count 0x0008 001 001 000 Old_age Offline - 1110 197 Current_Pending_Sector 0x0008 253 195 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0008 252 001 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline - 0 200 Multi_Zone_Error_Rate 0x000a 252 252 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 252 000 Old_age Always - 476 202 TA_Increase_Count 0x000a 253 001 000 Old_age Always - 0 203 Run_Out_Cancel 0x000b 253 213 180 Pre-fail Always - 85 204 Shock_Count_Write_Opern 0x000a 253 001 000 Old_age Always - 0 205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always - 0 207 Spin_High_Current 0x002a 253 252 000 Old_age Always - 0 208 Spin_Buzz 0x002a 253 252 000 Old_age Always - 0 209 Offline_Seek_Performnce 0x0024 193 188 000 Old_age Offline - 0 99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline - 0 SMART Error Log Version: 1 Warning: ATA error count 57343 inconsistent with error log pointer 5 ATA Error Count: 57343 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 57343 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 7f 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d7f = 142719 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 c0 7f 2d 02 e0 00 06:00:34.160 READ DMA ec 03 46 00 00 00 a0 00 06:00:34.144 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:34.144 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:34.144 IDENTIFY DEVICE c8 00 c8 77 2d 02 e0 00 06:00:33.120 READ DMA Error 57342 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 77 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d77 = 142711 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 c8 77 2d 02 e0 00 06:00:33.120 READ DMA ec 03 46 00 00 00 a0 00 06:00:33.104 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:33.104 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:33.104 IDENTIFY DEVICE c8 00 d0 6f 2d 02 e0 00 06:00:32.096 READ DMA Error 57341 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 6f 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d6f = 142703 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d0 6f 2d 02 e0 00 06:00:32.096 READ DMA ec 03 46 00 00 00 a0 00 06:00:32.080 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:32.080 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:32.080 IDENTIFY DEVICE c8 00 d8 67 2d 02 e0 00 06:00:31.072 READ DMA Error 57340 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 67 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d67 = 142695 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 d8 67 2d 02 e0 00 06:00:31.072 READ DMA ec 03 46 00 00 00 a0 00 06:00:31.056 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:31.056 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:31.056 IDENTIFY DEVICE c8 00 e0 5f 2d 02 e0 00 06:00:30.032 READ DMA Error 57339 occurred at disk power-on lifetime: 7328 hours (305 days + 8 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bf 5f 2d 02 e0 Error: UNC 191 sectors at LBA = 0x00022d5f = 142687 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 e0 5f 2d 02 e0 00 06:00:30.032 READ DMA ec 03 46 00 00 00 a0 00 06:00:30.016 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 06:00:30.016 SET FEATURES [Set transfer mode] ec 00 00 80 2d 02 a0 00 06:00:30.016 IDENTIFY DEVICE c8 00 e8 57 2d 02 e0 00 06:00:29.008 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 40% 7352 142720 # 2 Short offline Completed: read failure 60% 7321 142720 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

RAID / synchronisation MD1 impossible

RAID / synchronisation MD1 impossible

Re: RAID / synchronisation MD1 impossible

Re: RAID / synchronisation MD1 impossible

Re: RAID / synchronisation MD1 impossible

Re: RAID / synchronisation MD1 impossible

Re: RAID / synchronisation MD1 impossible

Re: RAID / synchronisation MD1 impossible

Qui est en ligne ?