j'ai suivi ttes les etapes de configuration de openswan mais lorsque je teste ma connection ces messages m'apparait:
[root@localhost user]# ipsec auto --status
000 interface lo/lo ::1
000 interface lo/lo 127.0.0.1
000 interface lo/lo 127.0.0.1
000 interface ath0/ath0 192.168.1.5
000 interface ath0/ath0 192.168.1.5
000 interface eth0/eth0 192.168.1.7
000 interface eth0/eth0 192.168.1.7
000 %myid = (none)
000 debug none
000
000 algorithm ESP encrypt: id=2, name=ESP_DES, ivlen=8, keysizemin=64, keysizemax=64
000 algorithm ESP encrypt: id=3, name=ESP_3DES, ivlen=8, keysizemin=192, keysizemax=192
000 algorithm ESP encrypt: id=7, name=ESP_BLOWFISH, ivlen=8, keysizemin=40, keysizemax=448
000 algorithm ESP encrypt: id=11, name=ESP_NULL, ivlen=0, keysizemin=0, keysizemax=0
000 algorithm ESP encrypt: id=12, name=ESP_AES, ivlen=8, keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=252, name=ESP_SERPENT, ivlen=8, keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=253, name=ESP_TWOFISH, ivlen=8, keysizemin=128, keysizemax=256
000 algorithm ESP auth attr: id=1, name=AUTH_ALGORITHM_HMAC_MD5, keysizemin=128, keysizemax=128
000 algorithm ESP auth attr: id=2, name=AUTH_ALGORITHM_HMAC_SHA1, keysizemin=160, keysizemax=160
000 algorithm ESP auth attr: id=5, name=AUTH_ALGORITHM_HMAC_SHA2_256, keysizemin=256, keysizemax=256
000 algorithm ESP auth attr: id=251, name=(null), keysizemin=0, keysizemax=0
000
000 algorithm IKE encrypt: id=5, name=OAKLEY_3DES_CBC, blocksize=8, keydeflen=192
000 algorithm IKE encrypt: id=7, name=OAKLEY_AES_CBC, blocksize=16, keydeflen=128
000 algorithm IKE hash: id=1, name=OAKLEY_MD5, hashsize=16
000 algorithm IKE hash: id=2, name=OAKLEY_SHA1, hashsize=20
000 algorithm IKE dh group: id=2, name=OAKLEY_GROUP_MODP1024, bits=1024
000 algorithm IKE dh group: id=5, name=OAKLEY_GROUP_MODP1536, bits=1536
000 algorithm IKE dh group: id=14, name=OAKLEY_GROUP_MODP2048, bits=2048
000 algorithm IKE dh group: id=15, name=OAKLEY_GROUP_MODP3072, bits=3072
000 algorithm IKE dh group: id=16, name=OAKLEY_GROUP_MODP4096, bits=4096
000 algorithm IKE dh group: id=17, name=OAKLEY_GROUP_MODP6144, bits=6144
000 algorithm IKE dh group: id=18, name=OAKLEY_GROUP_MODP8192, bits=8192
000
000 stats db_ops.c: {curr_cnt, total_cnt, maxsz} :context={0,0,0} trans={0,0,0} attrs={0,0,0}
000
000 "net-to-net": 192.168.2.0/24===192.168.1.5[@localhost]---192.168.1.1...192.168.1.1---192.168.1.6[@localhost]===192.168.1.0/24; unrouted; eroute owner: #0
000 "net-to-net": srcip=unset; dstip=unset; srcup=ipsec _updown; dstup=ipsec _updown;
000 "net-to-net": ike_life: 3600s; ipsec_life: 28800s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0
000 "net-to-net": policy: RSASIG+ENCRYPT+TUNNEL+PFS+UP; prio: 24,24; interface: ath0;
000 "net-to-net": newest ISAKMP SA: #0; newest IPsec SA: #0;
000
000 #2: "net-to-net":500 STATE_MAIN_I3 (sent MI3, expecting MR3); EVENT_RETRANSMIT in 35s; lastdpd=-1s(seq in:0 out:0)
000 #2: pending Phase 2 for "net-to-net" replacing #0
000
[root@localhost user]# ipsec auto --verbose --up net-to-net
002 "net-to-net" #1: initiating Main Mode
104 "net-to-net" #1: STATE_MAIN_I1: initiate
003 "net-to-net" #1: received Vendor ID payload [Openswan (this version) 2.4.6 X.509-1.5.4 PLUTO_SENDS_VENDORID PLUTO_USES_KEYRR]
003 "net-to-net" #1: received Vendor ID payload [Dead Peer Detection]
003 "net-to-net" #1: received Vendor ID payload [RFC 3947] method set to=110
002 "net-to-net" #1: enabling possible NAT-traversal with method 3
002 "net-to-net" #1: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
106 "net-to-net" #1: STATE_MAIN_I2: sent MI2, expecting MR2
002 "net-to-net" #1: I did not send a certificate because I do not have one.
003 "net-to-net" #1: NAT-Traversal: Result using 3: no NAT detected
002 "net-to-net" #1: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
108 "net-to-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3
003 "net-to-net" #1: ignoring informational payload, type INVALID_KEY_INFORMATION
003 "net-to-net" #1: received and ignored informational message
010 "net-to-net" #1: STATE_MAIN_I3: retransmission; will wait 20s for response
003 "net-to-net" #1: discarding duplicate packet; already STATE_MAIN_I3
003 "net-to-net" #1: ignoring informational payload, type INVALID_KEY_INFORMATION
003 "net-to-net" #1: received and ignored informational message
010 "net-to-net" #1: STATE_MAIN_I3: retransmission; will wait 40s for response
003 "net-to-net" #1: discarding duplicate packet; already STATE_MAIN_I3
003 "net-to-net" #1: ignoring informational payload, type INVALID_KEY_INFORMATION
003 "net-to-net" #1: received and ignored informational message
031 "net-to-net" #1: max number of retransmissions (2) reached STATE_MAIN_I3. Possible authentication failure: no acceptable response to our first encrypted message
000 "net-to-net" #1: starting keying attempt 2 of an unlimited number, but releasing whack
