SAMBA en PDC

Forum dédié à la distribution du même nom et que vous pourrez télécharger sur http://www.contribs.org. La nouvelle version de cette distribution se nomme SME Server

Modérateur: modos Ixus

SAMBA en PDC

Messagepar bigsantos » 21 Jan 2006 13:22

Bonjour
j'ai installé SME Server 5.6 sur laquelle se trouve samba 2.2.5
jai modifié le fichier smb.conf pour qu'il fonctionne en PDC, j'y ai ajouté des comptes utiisateurs et des compte d'ordinateurs, cependant quand j'essaie de me logger avec un compte utilisateur sur un pc avec windows XP Pro il me met ceci:
" Windows ne peut se connecter au domaine, car le controeur de domaine ne fonctionne pas, est indisponible, ou votre compte d'ordinateur n'a as été trouvé. Recomencez ultérieurement. "
Pourtant si je me connecte avec un compte sur un pc avec winows 2000 Pro il se connecte mais met ceci:
"Windows ne peut pas créer le répertoire de profils /home/netlogon.pds. Vous ne serez connecté qu'avec un profil local. Les modifications apportées au profil ne seront pas propagées au serveur. Contactez votre administrateur réseau.
DETAIL - Le chemin d'accès spécifié est introuvable. "
ensuite quand je clik sur "ok" il met la phrase suivante: "Windows ne trouvant pas le profil local, il vous ouvre une session avec un profil temporaire. Les modifications que vous effectuerez sur ce profil seront perdues quand vous fermerez cette session."
quelqu'un pourrait m'aider a trouver le problème? Merci pour votre aide.
je vous colle mon smb.conf


# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = TOUSSAINT
#nom de la machin
netbios name = HOMARD
# server string is the equivalent of the NT Description field
server string = SAMBAXBOX %v

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 10.179.2.1 10.179.2.2 10.179.2.3 10.179.2.4 10.179.2.5 10.179.2.6 10.179.2.7 10.179.2.8 10.179.2.9 10.179.2.10 10.179.2.10 10.179.2.11 10.179.2.12 10.179.2.13 10.179.2.14 10.179.2.15 10.179.2.16 10.179.2.17 10.179.2.18 10.179.2.19 10.179.2.20 10.179.2.253

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = nobody

# this tells Samba to use a separate log file for each machine
# that connects
# log file = /var/log/samba/%m.log
# all log information in one file
log file = /var/log/samba/log.smbd

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
os level = 64

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
logon script = %m.bat
# run a specific logon batch file per username
logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
# \\%L\Profiles\%U
logon path = /home/netlogon
logon script = logon.bat

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = 10.179.2.253

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
preserve case = yes
short preserve case = no
# Default case is normally upper case for all DOS files
default case = lower
# Be very careful with case sensitivity - it can break things!
case sensitive = yes
add user script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M %u


#============================ Share Definitions ==============================
[homes]
comment = Home Directories
path = /home
valid users = %S
create mode = 0700
directory mode = 0700
browseable = no
writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /home/netlogon
public = no
write list = bigsantos
browseable = no
guest ok = no
writable = no
share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
[Profiles]
path = /home/profiles
browseable = no
read only = no
create mask = 0600
directory mask = 0700
guest ok = no


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes

# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
[public]
comment = Public Stuff
path = /home/samba/public
create mask = 0777
directory mask = 0777
public = yes
read only = yes
write list = @staff
guest ok = yes

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[bigsantossdir]
; comment = bigsantos' Service
; path = /home/private
; valid users = bigsantos
; public = no
; writable = yes
; printable = yes

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
[pchome]
comment = PC Directories
path = /usr/pc/%m
public = no
writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
bigsantos
Matelot
Matelot
 
Messages: 9
Inscrit le: 21 Jan 2006 13:13
Localisation: Abidjan

Re: SAMBA en PDC

Messagepar gwaa » 21 Jan 2006 21:02

Salut,
Tu as un problème de permission sur ton partage [profiles], c'est pour ça que windows ne trouve de et ne peut pas en créer.
[profiles]
path = /le/repertoire
browseable = No
read only = No
create mode = 0644
directory mode = 0755

ça marche très bien chez moi ça :D

Il faut que tu t'assures aussi que les utilisateurs aient le droit d'écrire dans le repertoire où tu stock les profiles.
il faut faire : chmod -R 775 /le/repertoire
"/le/repertoire": est bien sûr le repertoire où sont stockés les profiles.

Pour ce qui est du problème du contrôleur de domaine avec ton poste XP, vérifies que xp connaisse bien où se trouve le contrôleur. Tu peux lui donner l'adresse ip du serveur wins explicitement.
IPCOP 1.4.10 (P2 266Mhz/256Mo SDRam/15Go HDD) Green(4 postes)+Orange(2 postes FreeBSD)
gwaa
Quartier Maître
Quartier Maître
 
Messages: 25
Inscrit le: 20 Déc 2005 00:21
Localisation: Lyon

Messagepar john56 » 22 Jan 2006 00:55

as tu mis la clef de registre pour xp pro pour qu'il se connecte au domaine ?
john56
Major
Major
 
Messages: 90
Inscrit le: 17 Nov 2005 21:58

Messagepar bigsantos » 23 Jan 2006 16:19

:D merci les gars pour votre soutien, ca passe sur xp maintenant. Le seul hic c'est que je continue d'avoir ce message de profile temporaire qu'il veut creer. :(
bigsantos
Matelot
Matelot
 
Messages: 9
Inscrit le: 21 Jan 2006 13:13
Localisation: Abidjan

Messagepar bigsantos » 27 Jan 2006 22:03

oui g mis les clés dans le registre pour XP
bigsantos
Matelot
Matelot
 
Messages: 9
Inscrit le: 21 Jan 2006 13:13
Localisation: Abidjan


Retour vers E-Smith / SME Server

Qui est en ligne ?

Utilisateur(s) parcourant actuellement ce forum : Aucun utilisateur inscrit et 1 invité

cron