probleme de detection d'usb sous ipcop

[tornado-]

alors voila des que je tappe la command dmesg en root : Linux version 2.4.27 (root@server) (gcc version 2.95.3 20010315 (release)) #1 Thu Sep 30 02:57:11 GMT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 0000000000100000 - 0000000003000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
48MB LOWMEM available.
On node 0 totalpages: 12288
zone(0): 4096 pages.
zone(1): 8192 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 97 and too old
You can enable it with acpi=force
Kernel command line: root=/dev/hda4 panic=10 acpi=off ro
Initializing CPU#0
Detected 165.791 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 330.95 BogoMIPS
Memory: 46204k/49152k available (1271k kernel code, 2560k reserved, 391k data, 92k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
CPU: Intel Pentium MMX stepping 03
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfd941, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Limiting direct PCI/PCI transfers.
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 00:07.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: ST32122A, ATA DISK drive
blk: queue c02e0f20, I/O limit 4095Mb (mask 0xffffffff)
hdc: Memorex CD-MAXX 52, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 4124736 sectors (2112 MB) w/128KiB Cache, CHS=1023/64/63, (U)DMA
hdc: attached ide-cdrom driver.
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda4
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 92k freed
frandom: Seeded global generator now (used by erandom)
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 92156k swap-space (priority -1)
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (384 buckets, 3072 max) - 316 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xc384fc00, 00:50:22:d0:9a:d8, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth1: RealTek RTL8139 at 0xc3851800, 00:c0:a8:8e:ce:d7, IRQ 10
eth1: Identified 8139 chip type 'RTL-8139C'
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1

Malheureusement je vois que les ports usb ne sont pas detecté ce qui n'est pas pratique pour l installation de mon modem thomson speed touch usb 330 si quelqu un à une solution , elle sera la bien venue
ps : aucun des led de mon modem ne s'allume et pourtant je l est testé sur un autre pc il fonctionnne ! )
Merci d'avance

[micjack]

Si, ils ne sont pas detectés, c'est soit qu'ils ne sont pas activés dans le BIOS, soit c'est une carte additive à base de chipset exotiques qu'IPCop ne connait pas..

Mais comme tu as une carte mere à base de chipset Intel (UHCI), cela ne devrait pas poser de probleme..

Alors, carte mere avec USB integrés ou pas?

Cela manque d'infos

[tornado-]

Donc c'est une carte mére ayant les usb intégrés , la marque de la tour est un packard bell multimedia

[wallegen]

je parierais pour une activation dans le bios

[Gesp]

PIIX3 malhereureusement tu auras des coupures du fait de bugs dans le chip usb.

[tornado-]

oké j'ai trouver une solution j'utilise mon routeur en tant que modem en mettant mon ipcop en dmz et en rajoutant une carte reseau pour le lan mais j'ai des problemes de configuration si quelqu un pouvais m'aider voici mon msn : baby_foot_007@hotmail.com ca sera plus simple a expliqué mon probléme merci d'avance et merci pour vos réponses