Probleme de connec avec une St330 USB rev2 (violet)

[bloodymatt]

Bonsoir a tous,

Ca fait un moment maintenant que je prend la tete avec ce modem, et ca ne change .... rien.
En fait j'ai mis le bon driver (mgmt.o), et je pense avoir bien config la connec (pppoa+ttes mes infos) mais il ne veut pas se connecter, il m'affiche "connexion en cours" en permanence, pour info je tourne avec ipcop 1.4 maj 1.4.1 et voila mes log "red" :

03:08:00 pppd[1156] Connection terminated.
03:08:00 pppd[1156] Child process /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 (pid 1157) terminated with signal 15
03:08:00 pppd[1156] Exit.
03:08:00 red: Speedtouch USB stop
03:08:31 pppd[1706] pppd 2.4.2 started by root, uid 0
03:08:31 pppoa3[1707] pppoa3 version 1.2 started by root (uid 0)
03:08:31 pppoa3[1707] A previous instance seems to be running
03:08:31 pppoa3[1707] Sending the kill signal to 380 and waiting...
03:08:31 pppd[1706] Using interface ppp0
03:08:31 pppd[1706] Connect: ppp0 <--> /dev/pts/0
03:10:55 pppd[1706] Terminating on signal 15.
03:10:55 pppd[1706] Child process /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 (pid 1707) terminated with signal 15
03:10:55 pppd[1706] Modem hangup
03:10:55 pppd[1706] Connection terminated.
03:10:55 pppd[1706] Exit.
03:10:55 red: Speedtouch USB stop
03:14:40 pppd[1865] pppd 2.4.2 started by root, uid 0
03:14:40 pppoa3[1866] pppoa3 version 1.2 started by root (uid 0)
03:14:40 pppoa3[1866] A previous instance seems to be running
03:14:40 pppoa3[1866] Sending the kill signal to 380 and waiting...
03:14:40 pppd[1865] Using interface ppp0
03:14:40 pppd[1865] Connect: ppp0 <--> /dev/pts/0
03:15:49 pppd[1865] Terminating on signal 15.
03:15:49 pppd[1865] Child process /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 (pid 1866) terminated with signal 15
03:15:49 pppd[1865] Modem hangup
03:15:49 pppd[1865] Connection terminated.
03:15:49 pppd[1865] Exit.
03:15:49 red: Speedtouch USB stop
03:15:53 pppd[2060] pppd 2.4.2 started by root, uid 0
03:15:53 pppoa3[2061] pppoa3 version 1.2 started by root (uid 0)
03:15:53 pppoa3[2061] A previous instance seems to be running
03:15:53 pppoa3[2061] Sending the kill signal to 380 and waiting...
03:15:53 pppd[2060] Using interface ppp0
03:15:53 pppd[2060] Connect: ppp0 <--> /dev/pts/0
03:16:38 pppd[2060] Terminating on signal 15.
03:16:38 pppd[2060] Child process /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 (pid 2061) terminated with signal 15
03:16:38 pppd[2060] Modem hangup
03:16:38 pppd[2060] Connection terminated.
03:16:38 pppd[2060] Exit.
03:16:38 red: Speedtouch USB stop
03:16:48 pppd[2263] pppd 2.4.2 started by root, uid 0
03:16:48 pppoa3[2264] pppoa3 version 1.2 started by root (uid 0)
03:16:48 pppoa3[2264] A previous instance seems to be running
03:16:48 pppoa3[2264] Sending the kill signal to 380 and waiting...
03:16:48 pppd[2263] Using interface ppp0
03:16:48 pppd[2263] Connect: ppp0 <--> /dev/pts/0
03:19:19 pppd[2263] LCP: timeout sending Config-Requests
03:32:27 pppd[2263] Terminating on signal 15.
03:32:27 pppd[2263] Connection terminated.
03:32:27 pppd[2263] Child process /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 (pid 2264) terminated with signal 15
03:32:27 pppd[2263] Exit.
03:32:27 red: Speedtouch USB stop
03:32:51 kernel: usb-uhci.c interrupt, status 3, frame# 235
03:32:51 modem_run[564] Error reading interrupts
03:32:51 modem_run[564] [monitoring report] ADSL link stays stable (down)
03:32:51 modem_run[564] Error reading interrupts
03:32:51 modem_run[564] [monitoring report] ADSL link stays stable (down)
03:32:51 kernel: usb.c USB disconnect on device 00:1d.0-2 address 2
03:32:51 modem_run[564] Error reading interrupts
03:32:51 modem_run[564] [monitoring report] ADSL link stays stable (down)
03:32:51 modem_run[564] Device disconnected, shutting down
03:32:56 kernel: usb.c USB device 3 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
03:33:18 red: Speedtouch USB Uploading firmware to modem
03:33:18 modem_run[4422] modem_run version 1.2 started by root uid 0
03:33:18 modem_run[4422] Found SpeedTouch USB modem
03:33:18 modem_run[4422]: Modem revision 0200
03:33:18 modem_run[4422] Best offset 5472 with probability 100%
03:33:18 modem_run[4422] Best offset 983 with probability 100%
03:33:18 modem_run[4422]: Firmware info (CRC:0xd80bf9f7, Size:991, Checked Yes, Alcatel/Thomson Boot block (old))
03:33:18 modem_run[4422] Best offset 6463 with probability 100%
03:33:18 modem_run[4422] Best offset 526179 with probability 100%
03:33:18 modem_run[4422]: Firmware info (CRC:0x94a45435, Size:526187, Checked Yes, 1.3.3 - GNU/Linux - Win32)
03:33:20 kernel: usb_control/bulk_msg timeout
03:33:20 kernel: usbdevfs USBDEVFS_BULK failed dev 3 ep 0x85 len 512 ret -110
03:33:20 modem_run[4422]: BLOCK1 : 991 bytes uploaded OK
03:33:21 modem_run[4422]: BLOCK2 : 511 bytes downloaded OK
03:33:22 modem_run[4422]: BLOCK3 : 526187 bytes uploaded OK
03:33:22 modem_run[4422]: BLOCK4 : 511 bytes downloaded OK
03:33:23 modem_run[4422]: Modem reference 3566067A......
03:33:32 red: Speedtouch USB stop
03:33:35 pppd[4469] pppd 2.4.2 started by root, uid 0
03:33:35 pppoa3[4470] pppoa3 version 1.2 started by root (uid 0)
03:33:35 pppoa3[4470] A previous instance seems to be running
03:33:35 pppoa3[4470] No previous instance found
03:33:35 pppoa3[4470] Control thread ready
03:33:35 pppoa3[4470] pusb_claim_interface 1 failed
03:33:35 pppd[4469] Couldn't get channel number: Input/output error
03:33:35 pppd[4469] Exit.
03:33:41 pppd[4504] pppd 2.4.2 started by root, uid 0
03:33:41 pppoa3[4505] pppoa3 version 1.2 started by root (uid 0)
03:33:41 pppoa3[4505] A previous instance seems to be running
03:33:41 pppoa3[4505] Sending the kill signal to 4470 and waiting...
03:33:41 pppd[4504] Using interface ppp0
03:33:41 pppd[4504] Connect: ppp0 <--> /dev/pts/0
03:34:53 modem_run[4422] ADSL synchronization timed out - the monitoring instance will report further state changes
03:34:53 red: Speedtouch USB: Firmware upload failed Retrying
03:34:53 kernel: usb.c USB disconnect on device 00:1d.0-0 address 1
03:34:53 kernel: usb.c USB disconnect on device 00:1d.0-2 address 3
03:34:53 modem_run[4423] Error reading interrupts
03:34:53 modem_run[4423] [monitoring report] ADSL link stays stable (down)
03:34:53 modem_run[4423] Device disconnected, shutting down
03:34:53 kernel: usb.c USB bus 1 deregistered
03:34:53 kernel: usb.c USB disconnect on device 00:1d.1-0 address 1
03:34:53 kernel: usb.c USB bus 2 deregistered
03:34:53 kernel: usb.c USB disconnect on device 00:1d.2-0 address 1
03:34:54 kernel: usb.c USB bus 3 deregistered
03:34:56 kernel: usb-uhci.c: $Revision 1.275 $ time 03:00:38 Sep 30 2004
03:34:56 kernel: usb-uhci.c High bandwidth mode enabled
03:34:56 kernel: usb-uhci.c USB UHCI at I/O 0xd800, IRQ 9
03:34:56 kernel: usb-uhci.c Detected 2 ports
03:34:56 kernel: usb.c new USB bus registered, assigned bus number 1
03:34:56 kernel: usb-uhci.c USB UHCI at I/O 0xd000, IRQ 11
03:34:56 kernel: usb-uhci.c Detected 2 ports
03:34:56 kernel: usb.c new USB bus registered, assigned bus number 2
03:34:56 kernel: usb-uhci.c USB UHCI at I/O 0xd400, IRQ 10
03:34:56 kernel: usb-uhci.c Detected 2 ports
03:34:56 kernel: usb.c new USB bus registered, assigned bus number 3
03:34:56 kernel: usb-uhci.c v1.275:USB Universal Host Controller Interface driver
03:34:56 kernel: usb.c USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
03:34:59 modem_run[4590] modem_run version 1.2 started by root uid 0
03:34:59 modem_run[4590] Found SpeedTouch USB modem
03:34:59 modem_run[4590]: Modem revision 0200
03:34:59 modem_run[4590] Best offset 5472 with probability 100%
03:34:59 modem_run[4590] Best offset 983 with probability 100%
03:34:59 modem_run[4590]: Firmware info (CRC:0xd80bf9f7, Size:991, Checked Yes, Alcatel/Thomson Boot block (old))
03:34:59 modem_run[4590] Best offset 6463 with probability 100%
03:34:59 modem_run[4590] Best offset 526179 with probability 100%
03:34:59 modem_run[4590]: Firmware info (CRC:0x94a45435, Size:526187, Checked Yes, 1.3.3 - GNU/Linux - Win32)
03:35:01 kernel: usb_control/bulk_msg timeout
03:35:01 kernel: usbdevfs USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
03:35:01 modem_run[4590]: BLOCK1 : 991 bytes uploaded OK
03:35:01 modem_run[4590]: BLOCK2 : 511 bytes downloaded OK
03:35:03 modem_run[4590]: BLOCK3 : 526187 bytes uploaded OK
03:35:03 modem_run[4590]: BLOCK4 : 511 bytes downloaded OK
03:35:04 modem_run[4590]: Modem reference 3566067A......
03:36:12 pppd[4504] LCP: timeout sending Config-Requests
03:36:34 modem_run[4590] ADSL synchronization timed out - the monitoring instance will report further state changes
03:36:34 red: Speedtouch USB: Firmware upload failed Exiting
03:37:58 pppd[4504] Terminating on signal 15.
03:37:58 pppd[4504] Connection terminated.
03:37:58 pppd[4504] Child process /usr/sbin/pppoa3 -c -m 1 -vpi 8 -vci 35 (pid 4505) terminated with signal 15
03:37:58 pppd[4504] Exit.
03:37:58 red: Speedtouch USB stop
03:38:05 pppd[5058] pppd 2.4.2 started by root, uid 0
03:38:05 pppoa3[5059] pppoa3 version 1.2 started by root (uid 0)
03:38:05 pppoa3[5059] A previous instance seems to be running
03:38:05 pppoa3[5059] Sending the kill signal to 4470 and waiting...
03:38:05 pppd[5058] Using interface ppp0
03:38:05 pppd[5058] Connect: ppp0 <--> /dev/pts/0
03:40:36 pppd[5058] LCP: timeout sending Config-Requests



Voila si quelqu'un veut bien m'aider a sortir de la galere sinon plan B j'attrape le modem a la batte et je lui apprend a voler ^^.

Merci d'avance

[Gesp]

Tu as 2 processus de démarrage simultanés.

Dors un peu, puis débranche le modem, tape /etc/rc.d/rc.red stop && /etc/rc.d/rc.red clear
Vérifie qu'il n'y a plus de 'rc.connectioncheck start' actif avec ps ax
Puis relance avec /etc/rc.d/rc.red start

En fait j'ai mis le bon driver (mgmt.o),

Pourtant ce n'est pas ce que j'ai écrit, non?

Cela ne doit pas t'empècher de te connecter mais coté fiabilité de la connexion je ne sais pas les conséquences. Autre chose, à priori, le driver kernel mode est mieux.

[bloodymatt]

Salut, merci pour ton aide Gesp mais malheureusement ca n'as rien changé, je commence a me dire que le modem marche pas, ce qui se passe c que j'ai suivi la marche a suivre que tu m'as indiqué
rc.red stop .....
et apres avoir fait ca je n'arrive plus a lancer la connexion avec l'interface WEB, quand je clique sur connexion la page est rafraichie mais le status reste "inactif". voila mes log :

12:48:54 modem_run[1568] modem_run version 1.2 started by root uid 0
12:48:54 modem_run[1568] Found SpeedTouch USB modem
12:48:54 modem_run[1568]: Modem revision 0200
12:48:54 modem_run[1568] Best offset 36 with probability 100%
12:48:54 modem_run[1568] Best offset 983 with probability 100%
12:48:54 modem_run[1568]: Firmware info (CRC:0xd80bf9f7, Size:991, Checked Yes, Alcatel/Thomson Boot block (old))
12:48:54 modem_run[1568] Best offset 1027 with probability 100%
12:48:54 modem_run[1568] Best offset 762642 with probability 100%
12:48:54 modem_run[1568]: Firmware info (CRC:0x78039fed, Size:762650, Checked Yes, 3.0.6 - MacOSX - Win32)
12:48:56 kernel: usb_control/bulk_msg timeout
12:48:56 kernel: usbdevfs USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
12:48:56 modem_run[1568]: BLOCK1 : 991 bytes uploaded OK
12:48:56 modem_run[1568]: BLOCK2 : 511 bytes downloaded OK
12:48:59 modem_run[1568]: BLOCK3 : 762650 bytes uploaded OK
12:48:59 modem_run[1568]: BLOCK4 : 511 bytes downloaded OK
12:49:00 modem_run[1568] Found kernel mode driver
12:49:00 modem_run[1568]: Modem reference 3566067A......
12:50:30 modem_run[1568] ADSL synchronization timed out - the monitoring instance will report further state changes

Ce qui me fait $%#&! aussi c que je comprend vraimnet pas comment ca marche l'USB sous Linux et j'aimerais bien comprendre ce que je fait qd meme !!!!

Merci d'avance

PS : j'en ai profit pour changer les drivers (KQD6_3.012) et mettre le modem en mode kernel.

[Gesp]

Tu es sur que ton branchement ne passe pas par un filtre ADSL en amont.

Tu n'aurais pas mis une rallonge posant problème (ne pas mettre le filtre avant la rallong mais au bout)?

Si le modem ne synchronise pas d'ou tu es, ce doit être la même chose sous Windows?

[bloodymatt]

Ben j'ai supersposé deux filtre ADSl puisque j'ai le PC Linux connecté et mon PC windows mais par contre, le windows synchronise sans aucun probleme.

Je vais qd meme essayer de le virer et de laisser sur la prise telephone que le Linux histoire de voir;

[bloodymatt]

AYYYYYYYYEEEEEEEEE CAAAAAA MAAARRRRCHHHHHEE

C bon le PC Linux se connecte au Net normùalement et il fournit mon Windaube en connec :) fin heureux,


Merci pour ton aide Gesp c vraimnet sympa, en fait j'ai payé ma reinstall d'IPCop (pas de social) histoire de repartir sur du propre et avec la petite manip du /etc/rc.d/rc.red stop... c passé nikel merci bcp il me faisait monté la bouffaïs ce truc !!!!

[Gesp]

Ne jamais empiler 2 filtres

Si les fréquences ADSL ne passent pas la sortie du premier conjoncteur, comment veux-tu que le second branchement puisse marcher?

[bloodymatt]

c vrai j'y avait pas pensé a celle la !!!!

Bon en tout cas tutti va bene ca tourne nikel et voila par contre Gesp, saurait tu me dire pourquoi j'avait deux processus de lancement ?? Parce que au départ j'ai voulu installé une Debian et le modem avait les meme problemes (d'apres les log en tt cas) donc bon la ca vas que pour IPCop tu m'as dépanné mais j'aimerais bien capté comment ca marche !!!

Merci pour tt quoiqu'il en soit

@+