Deco Sagem fast800 non dégroupé

Forum traitant de la distribution sécurisée montante nommée IP cop et basée sur la distribution Smoothwall. C'est à l'heure actuelle le forum le plus actif du site.

Modérateur: modos Ixus

Deco Sagem fast800 non dégroupé

Messagepar Azman » 22 Août 2004 10:43

Boujour tout le monde, j'ai pas trouvé de solution a mon problemes dans Rechercher !

Tout les matins, j'ai une déconnection et pas moyen de reconnecter!

Code: Tout sélectionner
DNS:

07:29:57 dnsmasq started, version 1.18 cachesize 150
07:29:57 dnsmasq read /etc/hosts - 3 addresses
07:29:57 dnsmasq reading /var/ipcop/red/resolv.conf
07:29:57 dnsmasq using nameserver 80.10.246.132#53
07:29:57 dnsmasq using nameserver 80.10.246.1#53
07:29:57 dnsmasq reading /var/state/dhcp/dhcpd.leases
07:35:50 dnsmasq failed to access /var/ipcop/red/resolv.conf: No such file or directory

IpCop:

02:09:10 ipcop Dynamic DNS ip-update for xxxxxx.no-ip.org: success
07:29:57 ipcop PPP has gone down on ppp0
07:30:03 ipcop Dialing Sagem.
07:31:38 ipcop Dialing Sagem.
07:33:12 ipcop Dialing Sagem.
07:34:46 ipcop Dialing Sagem.
07:36:20 ipcop Dialing Sagem.
07:37:55 ipcop Dialing sagem1.
07:39:28 ipcop Dialing sagem1.
07:41:02 ipcop Dialing sagem1.
07:42:36 ipcop Dialing sagem1.

ppp:
09:24:14 pppd[15753] Waiting for 1 child processes...
09:24:14 pppd[15753] script /usr/sbin/pppoa -I eth3 -m 1412, pid 15754
09:24:14 pppoa[15754] read (AsyncReadFromPPP): Input/output error
09:24:14 pppd[15753] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 15754), status = 0x1
09:24:14 pppd[15753] Exit.
09:24:39 pppd[15872] pppd 2.4.2 started by root, uid 0
09:24:39 pppd[15872] using channel 77
09:24:39 pppd[15872] Using interface ppp0
09:24:39 pppd[15872] Connect: ppp0 <--> /dev/pts/0
09:24:40 pppd[15872] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xa0d3579d>]
09:25:01 pppd[15872] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xa0d3579d>]
09:25:42 pppd[15872] Terminating on signal 15.
09:25:42 pppd[15872] sent [LCP TermReq id=0x2 "User request"]
09:25:45 pppd[15872] sent [LCP TermReq id=0x3 "User request"]
09:25:48 pppd[15872] Connection terminated.
09:25:48 pppd[15872] Waiting for 1 child processes...
09:25:48 pppd[15872] script /usr/sbin/pppoa -I eth3 -m 1412, pid 15873
09:25:48 pppoa[15873] read (AsyncReadFromPPP): Input/output error
09:25:48 pppd[15872] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 15873), status = 0x1
09:25:48 pppd[15872] Exit.
09:26:13 pppd[16007] pppd 2.4.2 started by root, uid 0
09:26:13 pppd[16007] using channel 78
09:26:13 pppd[16007] Using interface ppp0
09:26:13 pppd[16007] Connect: ppp0 <--> /dev/pts/0
09:26:14 pppd[16007] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x2dd9dcdb>]
09:27:16 pppd[16007] Terminating on signal 15.
09:27:16 pppd[16007] sent [LCP TermReq id=0x2 "User request"]
09:27:19 pppd[16007] sent [LCP TermReq id=0x3 "User request"]
09:27:22 pppd[16007] Connection terminated.
09:27:22 pppd[16007] Waiting for 1 child processes...
09:27:22 pppd[16007] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16008
09:27:22 pppoa[16008] read (AsyncReadFromPPP): Input/output error
09:27:22 pppd[16007] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16008), status = 0x1
09:27:22 pppd[16007] Exit.
09:27:48 pppd[16156] pppd 2.4.2 started by root, uid 0
09:27:48 pppd[16156] using channel 79
09:27:48 pppd[16156] Using interface ppp0
09:27:48 pppd[16156] Connect: ppp0 <--> /dev/pts/0
09:27:49 pppd[16156] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x55d14df2>]
09:28:51 pppd[16156] Terminating on signal 15.
09:28:51 pppd[16156] sent [LCP TermReq id=0x2 "User request"]
09:28:54 pppd[16156] sent [LCP TermReq id=0x3 "User request"]
09:28:57 pppd[16156] Connection terminated.
09:28:57 pppd[16156] Waiting for 1 child processes...
09:28:57 pppd[16156] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16157
09:28:57 pppoa[16157] read (AsyncReadFromPPP): Input/output error
09:28:57 pppd[16156] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16157), status = 0x1
09:28:57 pppd[16156] Exit.
09:29:22 pppd[16275] pppd 2.4.2 started by root, uid 0
09:29:22 pppd[16275] using channel 80
09:29:22 pppd[16275] Using interface ppp0
09:29:22 pppd[16275] Connect: ppp0 <--> /dev/pts/0
09:29:23 pppd[16275] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xa0933c30>]
09:29:59 pppd[16275] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xa0933c30>]
09:30:02 pppd[16275] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xa0933c30>]
09:30:25 pppd[16275] Terminating on signal 15.
09:30:25 pppd[16275] sent [LCP TermReq id=0x2 "User request"]
09:30:28 pppd[16275] sent [LCP TermReq id=0x3 "User request"]
09:30:31 pppd[16275] Connection terminated.
09:30:31 pppd[16275] Waiting for 1 child processes...
09:30:31 pppd[16275] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16276
09:30:31 pppoa[16276] read (AsyncReadFromPPP): Input/output error
09:30:31 pppd[16275] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16276), status = 0x1
09:30:31 pppd[16275] Exit.
09:30:56 pppd[16410] pppd 2.4.2 started by root, uid 0
09:30:56 pppd[16410] using channel 81
09:30:56 pppd[16410] Using interface ppp0
09:30:56 pppd[16410] Connect: ppp0 <--> /dev/pts/0
09:30:57 pppd[16410] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xd4c61fc4>]
09:31:59 pppd[16410] Terminating on signal 15.
09:31:59 pppd[16410] sent [LCP TermReq id=0x2 "User request"]
09:32:02 pppd[16410] sent [LCP TermReq id=0x3 "User request"]
09:32:05 pppd[16410] Connection terminated.
09:32:05 pppd[16410] Waiting for 1 child processes...
09:32:05 pppd[16410] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16411
09:32:05 pppoa[16411] read (AsyncReadFromPPP): Input/output error
09:32:05 pppd[16410] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16411), status = 0x1
09:32:05 pppd[16410] Exit.
09:32:30 pppd[16529] pppd 2.4.2 started by root, uid 0
09:32:30 pppd[16529] using channel 82
09:32:30 pppd[16529] Using interface ppp0
09:32:30 pppd[16529] Connect: ppp0 <--> /dev/pts/0
09:32:31 pppd[16529] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xbd658047>]
09:33:33 pppd[16529] Terminating on signal 15.
09:33:33 pppd[16529] sent [LCP TermReq id=0x2 "User request"]
09:33:36 pppd[16529] sent [LCP TermReq id=0x3 "User request"]
09:33:39 pppd[16529] Connection terminated.
09:33:39 pppd[16529] Waiting for 1 child processes...
09:33:39 pppd[16529] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16530
09:33:39 pppoa[16530] read (AsyncReadFromPPP): Input/output error
09:33:39 pppd[16529] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16530), status = 0x1
09:33:39 pppd[16529] Exit.
09:34:04 pppd[16648] pppd 2.4.2 started by root, uid 0
09:34:04 pppd[16648] using channel 83
09:34:04 pppd[16648] Using interface ppp0
09:34:04 pppd[16648] Connect: ppp0 <--> /dev/pts/0
09:34:05 pppd[16648] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x58e83123>]
09:35:02 pppd[16648] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x58e83123>]
09:35:05 pppd[16648] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x58e83123>]
09:35:07 pppd[16648] Terminating on signal 15.
09:35:07 pppd[16648] sent [LCP TermReq id=0x2 "User request"]
09:35:10 pppd[16648] sent [LCP TermReq id=0x3 "User request"]
09:35:13 pppd[16648] Connection terminated.
09:35:13 pppd[16648] Waiting for 1 child processes...
09:35:13 pppd[16648] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16649
09:35:13 pppoa[16649] read (AsyncReadFromPPP): Input/output error
09:35:13 pppd[16648] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16649), status = 0x1
09:35:13 pppd[16648] Exit.
09:35:39 pppd[16813] pppd 2.4.2 started by root, uid 0
09:35:39 pppd[16813] using channel 84
09:35:39 pppd[16813] Using interface ppp0
09:35:39 pppd[16813] Connect: ppp0 <--> /dev/pts/0
09:35:40 pppd[16813] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x77dca1aa>]
09:36:42 pppd[16813] Terminating on signal 15.
09:36:42 pppd[16813] sent [LCP TermReq id=0x2 "User request"]
09:36:45 pppd[16813] sent [LCP TermReq id=0x3 "User request"]
09:36:48 pppd[16813] Connection terminated.
09:36:48 pppd[16813] Waiting for 1 child processes...
09:36:48 pppd[16813] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16814
09:36:48 pppoa[16814] read (AsyncReadFromPPP): Input/output error
09:36:48 pppd[16813] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16814), status = 0x1
09:36:48 pppd[16813] Exit.
09:37:13 pppd[16932] pppd 2.4.2 started by root, uid 0
09:37:13 pppd[16932] using channel 85
09:37:13 pppd[16932] Using interface ppp0
09:37:13 pppd[16932] Connect: ppp0 <--> /dev/pts/0
09:37:14 pppd[16932] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0xa9dcd1d5>]
09:38:16 pppd[16932] Terminating on signal 15.
09:38:16 pppd[16932] sent [LCP TermReq id=0x2 "User request"]
09:38:19 pppd[16932] sent [LCP TermReq id=0x3 "User request"]
09:38:22 pppd[16932] Connection terminated.
09:38:22 pppd[16932] Waiting for 1 child processes...
09:38:22 pppd[16932] script /usr/sbin/pppoa -I eth3 -m 1412, pid 16933
09:38:22 pppoa[16933] read (AsyncReadFromPPP): Input/output error
09:38:22 pppd[16932] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 16933), status = 0x1
09:38:22 pppd[16932] Exit.
09:38:47 pppd[17051] pppd 2.4.2 started by root, uid 0
09:38:47 pppd[17051] using channel 86
09:38:47 pppd[17051] Using interface ppp0
09:38:47 pppd[17051] Connect: ppp0 <--> /dev/pts/0
09:38:48 pppd[17051] sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x2246478f>]
09:39:50 pppd[17051] Terminating on signal 15.
09:39:50 pppd[17051] sent [LCP TermReq id=0x2 "User request"]
09:39:53 pppd[17051] sent [LCP TermReq id=0x3 "User request"]
09:39:56 pppd[17051] Connection terminated.
09:39:56 pppd[17051] Waiting for 1 child processes...
09:39:56 pppd[17051] script /usr/sbin/pppoa -I eth3 -m 1412, pid 17052
09:39:56 pppoa[17052] read (AsyncReadFromPPP): Input/output error
09:39:56 pppd[17051] Script /usr/sbin/pppoa -I eth3 -m 1412 finished (pid 17052), status = 0x1
09:39:56 pppd[17051] Exit.

Noyau:

07:19:07 kernel INPUT IN=ppp0 OUT= MAC= SRC=220.198.9.157 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=3986 DF PROTO=TCP SPT=1554 DPT=9898 WINDOW=64240 RES=0x00 SYN URGP=0
07:21:16 kernel INPUT IN=ppp0 OUT= MAC= SRC=80.218.230.60 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=46666 PROTO=TCP SPT=3561 DPT=60346 WINDOW=16384 RES=0x00 SYN URGP=0
07:21:19 kernel INPUT IN=ppp0 OUT= MAC= SRC=80.218.230.60 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=46852 PROTO=TCP SPT=3561 DPT=60346 WINDOW=16384 RES=0x00 SYN URGP=0
07:21:25 kernel INPUT IN=ppp0 OUT= MAC= SRC=80.218.230.60 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=118 ID=47273 PROTO=TCP SPT=3561 DPT=60346 WINDOW=16384 RES=0x00 SYN URGP=0
07:22:06 kernel INPUT IN=ppp0 OUT= MAC= SRC=65.167.215.201 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=22663 DF PROTO=TCP SPT=3653 DPT=1433 WINDOW=65535 RES=0x00 SYN URGP=0
07:22:09 kernel INPUT IN=ppp0 OUT= MAC= SRC=65.167.215.201 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=115 ID=23261 DF PROTO=TCP SPT=3653 DPT=1433 WINDOW=65535 RES=0x00 SYN URGP=0
07:23:05 kernel INPUT IN=ppp0 OUT= MAC= SRC=61.18.243.19 DST=81.48.28.243 LEN=48 TOS=0x00 PREC=0x00 TTL=106 ID=20929 DF PROTO=TCP SPT=4940 DPT=9898 WINDOW=16384 RES=0x00 SYN URGP=0
07:28:45 kernel [EAGLE-USB] SM: LOS Defect
07:28:47 kernel [EAGLE-USB] SM: LOS Defect
07:28:47 kernel [eagle-usb] LOS Defect threshold reached. Rebooting
07:29:08 kernel [eagle-usb] Modem operational !!
09:13:17 kernel eth1: Setting full-duplex based on MII #1 link partner capability of 41e1.

Noyau et firwall:

WARNING:  Kernel Errors Present
   hda: task_no_data_intr: error=0x04 { DriveStat...:  1 Time(s)
   hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }...:  1 Time(s)
   hdb: task_no_data_intr: error=0x04 { DriveStat...:  1 Time(s)
   hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }...:  1 Time(s)


J'ai pas essayé eaglectrl -d -o, j'ai reboot a chaque fois... faut dire que ça le fait qu'un fois par jour!

Si vous avez déja eu le probleme, aidez moi :cry:
Ipcop 1.4.0
PII 400Mhz
128Mo SDRAM
6Go DD
Je vous souhaite une agréable journée et vous remercie pour vos réponses...
Avatar de l’utilisateur
Azman
Major
Major
 
Messages: 81
Inscrit le: 30 Jan 2003 01:00
Localisation: France

Messagepar Gesp » 22 Août 2004 11:54

Passe en beta9. Au moins, tu n'auras pas de log séparés, ce sera plus facile à comprendre.

Et puis je n'ai pas envie de faire le support des bugs qui sont déjà corrigés.
Avatar de l’utilisateur
Gesp
Amiral
Amiral
 
Messages: 4481
Inscrit le: 29 Déc 2002 01:00

Messagepar Azman » 26 Août 2004 17:20

Et puis je n'ai pas envie de faire le support des bugs qui sont déjà corrigés.


Je te comprends Gesp, y sont $%#&! les ptits débutants qui ne savent même pas se débrouiller!

Je vais passer direct en rc1... :lol:
Ipcop 1.4.0
PII 400Mhz
128Mo SDRAM
6Go DD
Je vous souhaite une agréable journée et vous remercie pour vos réponses...
Avatar de l’utilisateur
Azman
Major
Major
 
Messages: 81
Inscrit le: 30 Jan 2003 01:00
Localisation: France


Retour vers IPCop

Qui est en ligne ?

Utilisateur(s) parcourant actuellement ce forum : Aucun utilisateur inscrit et 1 invité

cron