voila j'ai retrouvé mon fichier de log complet :
U-Boot 1.1.5 (Sep 13 2007 - 15:33:24)
DRAM: 64 MB
NAND: NAND device: Manufacturer ID: 0xec, Chip ID: 0xda ( NAND 256MiB 3,3V 8-bi
t)
NAND: Pagesize: 2048, Blocksize: 128K, OOBsize: 64
256 MiB
DataFlash:AT45DB642
Nb pages: 8192
Page Size: 1056
Size= 8650752 bytes
Logical address: 0xD0000000
Area 0: D0000000 to D0003FFF (RO)
Area 1: D0004000 to D0007FFF
Area 2: D0008000 to D0037FFF (RO)
Area 3: D0038000 to D083FFFF
In: serial
Out: serial
Err: serial
DM9161A PHY Detected
No link
MAC: error during RMII initialization
Hit any key to stop autoboot: 0
## Booting image at 21500000 ...
Image Name: linux-2.6
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 707952 Bytes = 691.4 kB
Load Address: 20008000
Entry Point: 20008000
Verifying Checksum ... OK
OK
Starting kernel ...
Uncompressing Linux............................................... done, booting
the kernel.
Linux version 2.6.22.10 (
martiald@serveurlinux.erems.loc) (gcc version 4.2.1) #1
1 Mon Mar 3 14:50:15 CET 2008
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: Atmel AT91SAM9260-EK
Memory policy: ECC disabled, Data cache writeback
Clocks: CPU 198 MHz, master 99 MHz, main 18.432 MHz
CPU0: D VIVT write-back cache
CPU0: I cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists. Total pages: 16256
Kernel command line: mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root
=/dev/ram0 rw
AT91: 96 gpio irqs in 3 banks
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 60208KB available (1256K code, 243K data, 80K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 3072K
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
atmel_usart.0: ttyAT0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
atmel_usart.1: ttyAT1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL
atmel_usart.2: ttyAT2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
mice: PS/2 mouse device common for all mice
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 80K
Welcome to the Erik's uClibc development environment.
(none) login: root
Jan 1 00:00:21 login[157]: root login on 'console'
Welcome to the Erik's uClibc development environment.
(none) login:
Peut être que ça vous aidera à résoudre mon probléme.