Config sortie tv fc5 radeon

[hebus99]

Bonjour,

Mon problème est que je n'arrive pas à activer ma sorite TV depuis mon PC

Envirronnement:

PC sous FC5
Carte Radeon 9600 avec driver propriétaire "fglrx" OK

Mon fichier de configuration xorg.conf

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen "aticonfig-Screen[1]" Above "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Xerox XL-572"
DisplaySize 340 270
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection

Section "Monitor"
Identifier "aticonfig-Monitor[1]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "fglrx"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc RV350 AP [Radeon 9600]"
Option "VideoOverlay" "on"
Option "EnableMonitor" "crt1,tv"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "aticonfig-Device[1]"
Driver "fglrx"
Option "VideoOverlay" "on"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[1]"
Device "aticonfig-Device[1]"
Monitor "aticonfig-Monitor[1]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

Quand je fais :
[root@fedora X11]# aticonfig --query-monitor
Connected monitors: crt1
Enabled monitors: crt1

Je n'ais qu'un seul moniteur "crt1"

Je veux ensuite activer mon second moniteur qui est ma TV donc ;

[root@fedora X11]# aticonfig --enable-monitor crt1,tv
ati_dm: FGLRX_EnableDisplays failed when try to enable display: 5.
Using xorg.conf
Saved back-up to xorg.conf.fglrx-13

Là je vois bien qu'il y a un problème mais le quel ??

Sinon quand je demande des information sur ma sortie TV j'ai;
[root@fedora X11]# aticonfig --tv-info
The TV is not connected
The TV geometry is "0x0+0+0"
The horizontal position limits are [0, 158324368]
The vertical position limits are [157567376, 158156552]
TV overscan mode is enabled

Avec ça je voit que ma TV n'est apparament pas connecté ors elle EST et de plus si connecte ou pas le cordon cette information de bouge jamais.

Donc si qq'un voit mon problème je suis prenneur de toutes manipulation me pettant d'avancer car là j'ais dejà fais pas mal de config différentes.

Merci à tous.

[Muzo]

Bonjour,

Ixus est un site dédié sécurité. Pour tous problèmes de configuration lié à une distribution, merci de vous adressez aux forums de celles-ci.

Cordialement,

/Muzo