je veux configurer mon wifi "WAP"
alors j'ai configuré les fichiers /etc/wpa_supplicant.conf et /etc/network/interfaces comme suit
#/etc/wpa_supplicant.conf
- Code: Tout sélectionner
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
ap_scan=1
network={
ssid="DEVELOPPEMENT"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
#psk="xxxxxxxxxxxxx"
psk=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
}
/etc/network/interfaces
- Code: Tout sélectionner
auto wlan0
iface wlan0 inet static
address 192.168.3.26
netmask 255.255.255.0
network 192.168.1.0
gateway 192.168.3.1
wpa-conf /etc/wpa_supplicant.conf
#ifup wlan0
- Code: Tout sélectionner
SIOCSIFFLAGS: No such file or directory
Could not set interface 'wlan0' UP
wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1
SIOCSIFFLAGS: No such file or directory
SIOCSIFFLAGS: No such file or directory
Failed to bring up wlan0.
# wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf
- Code: Tout sélectionner
SIOCSIFFLAGS: No such file or directory
Could not set interface 'wlan0' UP
CTRL: Invalid group 'wheel'
Failed to initialize control interface 'DIR=/var/run/wpa_supplicant GROUP=wheel'.
You may have another wpa_supplicant process already running or the file was
left by an unclean termination of wpa_supplicant in which case you will need
to manually remove this file before starting wpa_supplicant again.
Si quelqu'un peut m'aider.
Merci
