Bonjour,
J'ai installé la nouvelle 7.2 puis après reboot j'ai regarde l'état du raid mais a chaque fois que je lance la commande apparemment il mouline, il recommence le "recovery" - regardez :
[root@sme-server ~]# cat /proc/mdstat
Personalities : [raid1]
md2 : active raid1 hdc2[1] hdd2[2]
58484544 blocks [2/1] [_U]
[==>..................] recovery = 13.1% (7691584/58484544) finish=31.8min speed=26605K/sec
md1 : active raid1 hdb1[0] hdd1[2] hdc1[1]
104320 blocks [2/2] [UU]
unused devices: <none>
......la meme commande 5 sec plus tard me donne ca :
[root@sme-server ~]# cat /proc/mdstat
Personalities : [raid1]
md2 : active raid1 hdc2[1] hdd2[2]
58484544 blocks [2/1] [_U]
[>....................] recovery = 0.4% (275456/58484544) finish=49.2min speed=19675K/sec
md1 : active raid1 hdb1[0] hdd1[2] hdc1[1]
104320 blocks [2/2] [UU]
unused devices: <none>
...des idées ?
merci