Salut à tous,
Je viens de trouver un lien très interressant.
http://packages.nass.com.au/e-smith/postfix/2.1-for-6.0b3/
Cela concerne l'installation de postfix sur une SME.
A+
Modérateur: modos Ixus
ls -l /bin/su
-rwsr-xr-x 1 root root 19116 avr 8 2002 /bin/su
-r-------- 1 root root 2530 jui 2 21:04 /etc/shadow
-rwsr-xr-x 1 root root 19116 avr 8 2002 /bin/su
ls -ld /tmp
drwxrwxrwt 4 root root 8192 jui 9 20:30 /tmp
chown root /ton/fichier
chmod 4755 /ton/fichier
chown root:admin /ton/script
chmod 4750 /ton/script
chmod 1777 tmp
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\netlogon\parameters]
"RequireSignOrSeal"=dword:00000000
/home/e-smith/files/server-resources/regedit/winxplogon.reg
http://<domaine ou adresse ip>/server-resources/regedit/
kudzu
J'utilise la distribution Geexbox pour ma divxbox car elle supporte également les cartes tv analogique et les télécommandes (un cd RW est un bon moyen de tester avant de se lancer dans l'installation ).Muzo a écrit:Salut,
Merci pour ta contribution.
Si elle est stable et bien testée, tu peux l'ajouter dans le newbie Kit .
Comme ca ta contribution ne se perdra pas au fin fond du forum.
/Muzo
#cd plus (j'utilise le script smeplus et j'aime bien classer mes rpm )
#mkdir thinclients
# cd thinclients
#wget http://distro.ibiblio.org/pub/linux/distributions/smeserver/contribs/trevorb/beta/Thinclient/smeserver-tftpd-0.36-1.i386.rpm
#wget http://distro.ibiblio.org/pub/linux/distributions/smeserver/contribs/trevorb/beta/Thinclient/smeserver-thinclient-1.2.0-5.noarch.rpm
# rpm -Uvh smeserver*.rpm
# cd ..
# mkdir nfs
# cd nfs
# wget http://sme.swerts-knudsen.com/downloads/NFS/nfs-utils-0.3.3-5.i386.rpm
# wget http://sme.swerts-knudsen.com/downloads/NFS/portmap-4.0-41.i386.rpm
# rpm -Uvh nfs*.rpm portmap*.rpm
# cd /etc/rc.d/rc7.d
# ln -s /etc/init.d/portmap S92portmap
# ln -s /etc/init.d/nfs S93nfs
# mkdir -p /etc/e-smith/templates-custom/etc/hosts.allow
# echo "nfs: 192.168.1.0/255.255.255.0" > /etc/e-smith/templates-custom/etc/hosts.allow/nfs
# echo "portmap: 192.168.1.0/255.255.255.0" > /etc/e-smith/templates-custom/etc/hosts.allow/portmap
# /sbin/e-smith/expand-template /etc/hosts.allow
$ cd ~
$ wget http://www.geexbox.org/releases/0.98.6/geexbox-0.98.6-full.tar
$ tar -xvf geexbox-0.98.6-full.tar
$ vi ~/geexbox-0.98.6/config/options
# cd ~/geexbox-0.98.6
# make pxe
# mkdir -p /etc/e-smith/templates-custom/etc/exports
# echo "/tftpboot/GEEXBOX.i386 192.168.1.0/255.255.255.0(ro,sync,no_root_squash)" > /etc/e-smith/templates-custom/etc/exports/GEEXBOX
# /sbin/e-smith/expand-template /etc/exports
# service portmap start
# service nfs start
Name: geexbox
Directory (/tftpboot/): GEEXBOX.i386/boot
Executable: pxelinux.0
Your PXE Boot Server is: enabled
Your TFTP Server is: self
The default Distribution is: geexbox
Retour vers E-Smith / SME Server
Utilisateur(s) parcourant actuellement ce forum : Aucun utilisateur inscrit et 1 invité